49 courses with the subject MECH, each shown exactly as we captured it from the college's catalog, with every element we hold. Where the wording looks broken, that is our reading of the catalog, not the college's text.
The vector approach of the equilibrium of particle and rigid bodies is presented. Trusses, frames, shear and bending moment diagrams, centroids and moments of inertia are studied. Prerequisites: MATH1850 or MATH1875 or MATH1877; and PHYS1250 (4 credits)
This course covers the first and second laws of thermodynamics. Thermodynamic properties, work, and heat interaction are defined. Conservation of mass, energy and entropy principles are presented and applied in analyzing thermodynamic systems and their components. Prerequisites: MATH1876; and PHYS1250 (4 credits) fall, spring
This course presents fundamental topics in thermo-fluid science: heat, work, energy and power. Properties of simple substances are studied in the context of thermodynamic analysis of processes and cycles for power production and refrigeration. System and control volume modeling is introduced using conservation of mass, as well as the First and Second Laws of Thermodynamics. Combustion analysis is also discussed. Prerequisites: MATH1876; and PHYS1250 (4 credits) fall, spring
This is a stand-alone laboratory course which is a co-requisite of the MECH2270 Thermodynamics course. It provides students with hands-on experience of learning fundamental thermodynamics principles by conducting a series of laboratory exercises. These exercises help reinforce and retain concepts and theories learned in the relevant MECH2270 lectures, consolidating the skills in basic thermal engineering analysis, and complementing the classroom learning through applications. Corequisites: MECH2270 (1 credit) fall, spring
Basic concepts of engineering graphics, design and sketching, tolerance analysis and ANSI standard drawings are explored using CAD. Prerequisite: ENGR1600 (3 credits)
This course covers the equilibrium of particles and rigid bodies. Internal forces in structures such as trusses frames and machines are determined. Axial, torsional, bending and transverse stresses in beams and other structures are calculated. Stress transformation is discussed. Topics such as thermal deformation, statically indeterminate structures, Mohr's circle and buckling are also covered. Four laboratory experiments are used to complement the theoretical learning. Prerequisites: PHYS1250 and MATH1850 or MATH1877 (4 credits) spring
The concepts of stress and strain and their relation are introduced. Axially loaded members, temperature effect, torsion, bending, combined loading and stress trans-formations are studied. Stability and buckling of columns are discussed. Laboratory experiences reinforce classroom theory. Prerequisite: MECH2000 (4 credits)
This 3-D Computer Aided Design course provides experience in mechanical engineering design and analysis. Assembly component interface tolerance analysis to ensure manufacturability of designs and basic finite element analysis of parts and assemblies are conducted. Prerequisites: MECH2000 and MECH2250 and MECH2500 and ENGR1800 (3 credits)
Studies vapor power systems including the Rankine cycle and its modifications for use with both fossil and nuclear fuels, vapor compression refrigeration systems, and all-gas cycles including the Brayton cycle and its modifications; the Otto cycle; the Diesel cycle; and supercharging and turbocharging. Introduces the concepts of exergy and second law efficiency. Studies non-reacting mixtures with applications to air/water/vapor mixtures for air conditioning systems and cooling towers. Discusses the elements of optimum power plant design. Laboratory experiences enforce the classroom theory. Prerequisite: MECH2250 (4 credits)
This course covers the basic concepts and principles in the design and analysis of machine components. The analysis in design is based on the traditional stress analysis from mechanics of materials and also on the finite element formulation based on theory of elasticity. Plane stress, three-dimensional stress and strain, combined stresses, failure criteria and reliability, fatigue, are considered in the analysis of machine elements: rolling bearings, spur gears, flexible elements, and shafts. Prerequisite: MECH2500 (4 credits)
This course will look at the use of fundamental physics and chemistry principles as a basis for advanced analysis of biological and synthetic objects. An integrated approach of on-line research, lecture, demonstration, and student exploration along with optical and scanning electron microscopy (SEM) will be used to verify findings. physical and elemental details that cannot normally be seen will be imaged and evaluated to gain an understanding of how naturally occurring and engineered products are developed. Based on student interest, additional analysis techniques will also be presented. Prerequisites: CHEM1100 and PHYS1250 (4 credits)
Moist air properties and air conditioning processes will be covered through theory, Psychometrics chart and Laboratory experiment. Building maximum heat loss (heating load in winter) and heat gain ( cooling load in summer) calculations will be discussed along with different heating and cooling systems and subsystems such as hot air, hydronic, vapor compression, absorption Refrigeration Cycles. Degree-day and bin methods to estimate building energy consumption will be covered. Prerequisite: MECH2250 (4 credits) summer
This course introduces the fundamental principles of fluid mechanics, focusing on fluid properties, hydrostatics, and basic hydrodynamics. Students apply conservation laws of mass, momentum and energy to analyze fluid behavior using the control volume approach. External flows are discussed, with emphasis on drag forces and boundary-layer phenomena. Laboratory activities (including experiments and data analysis) provide hands-on experiences that reinforce theoretical knowledge. Prerequisite: MATH2025 and MECH2250 (4 credits) fall, spring
This course covers computational methods in kinematics and dynamics of spatial and planar robotic mechanisms. It introduces the analysis of positions, velocities, accelerations, actuating forces, and actuating torques, as well as industrial robot applications. Students gain hands-on experience in simulating and implementing robotic arms and mechanisms with multiple degrees of freedom. (4 credits) fall
This is an advanced new undergraduate and graduate course that explores the fundamentals of different engineering problems with different simulation techniques and CFD. The course will present several important topics such as modeling techniques and CFD. The topics will cover different techniques to solve multidisciplinary engineering problems. The basic knowledge will be applied to typical problems in aerospace and different engineering applications. Prerequisites: MECH3100 and MECH2300 (4 credits)
The goal of this course is to develop the skills and confidence to use MATLAB as an effective tool in solving engineering problems. The basics of MATLAB will first be reviewed and the expanded upon. A variety of topic will be covered, including object-oriented programming, solving ordinary and partial differential equations, creating GUI's, the use of plot handles, and writing efficient code. Prerequisites: ENGR1800 and MATH2500 (3 credits)
This course introduces students to the methods and techniques used in LabVIEW and data acquisition. The topics emphasized are basic programming structures and best practices for programing in the LabVIEW environment. Additional topics include the fundamental concepts of data acquisition, techniques to obtain and analyze measurements of physical properties and quantities related to the field of mechanical engineering. Prerequisites: MECH2500, MECH2250 and ELEC2799. (4 credits)
This course is an introductory course to the subject of applied Gas Dynamics where the effect of compressibility on fluid flow is introduced. It starts with some basic notions of fluid flow and thermodynamics followed by one dimensional compressible flow. Normal and oblique shock waves. Construction and design of aircraft gas turbine engine. Simulation and CFD analysis of compressible flow and convergent-divergent nozzles. Prerequisites: MECH3200 (4 credits)
Techniques for the quantification of uncertainty and risk inherent in mechanical components and systems; and the implementation of reliability-based design in mechanical components and systems. (4 credits) Prerequisite: MECH3000
Why does a mechanical component with a specified factor of safety as 2.4 still fail? The traditional mechanical component design theory cannot answer this vital design question. The advanced design theory for mechanical components uses reliability to describe the safety of a component and clearly explains that any design component will fail due to the variation of material strength, loading and dimension of the component This course will address techniques for the quantification of uncertainty and risk inherent in mechanical components and implement reliability as the safety index to design mechanical components. Prerequisite: MECH2500 (3 credits)
This course introduces the principles of materials selection for aerospace applications, emphasizing the importance of processing, properties, microstructure, performance indices, and design strategies. Students learn how to read material property (Ashby) charts, do multi constraint selection, optimize shape and hybrid materials, and account for environmental impacts. Course labs provide experience with applying testing, analysis, and selection techniques to relevant challenges in aerospace. Prerequisite: CHEM1100 (4 credits) fall
This course covers static equilibrium and dynamic motion. Major components of this course are force vectors, equilibrium of a particle, resultant and internal forces, centroids, center of gravity, stress and strain, torsion, moments of inertia, shearing, deflection, kinematics of a particle, kinetics of a particle, force, acceleration, work and energy, impulse and momentum. The course includes labs that correspond to the lecture material. Prerequisites: MATH2025 and PHYS1750 (4 credits)
This is an introductory course to the structure and properties of materials. Subjects include the processing of materials, crystal structures, miller indices, compositions, alloying, electrical properties, phase diagrams, corrosion, diffusion, heat treating, inspection, and testing of materials utilized in the field of mechanical engineering. Prerequisite: MECH2500 or MECH2400 (4 credits) summer
This course is an introductory course to the subject of Aerodynamics. Fundamentals physical quantities and the source of all aerodynamics forces, continuity, momentum and energy equations. Measurement of airspeed: incompressible flow, subsonic compressible flow, supersonic flow. Introduction to viscous flow, laminar and turbulent boundaries, transition, flow separation. Airfoils, wings and other aerodynamic shapes. Elements of airplane performance, equations of motion, thrust, power and maximum velocity. Principles of stability and control (static and dynamic stability, control), moments on the airplane, absolute angle of attack. Astronautics: differential, Lagrange’s and orbit equations. Prerequisite: MECH3350 (4 credits)
Presents topics that are not covered by existing courses and are likely to change from semester to semester. Refer to the Class Schedule for a specific semester for details of offerings for the semester. (1 - 4 credits)
This course covers the kinematics and kinetics of particles and rigid bodies. Kinetic problems are analyzed by utilizing Newton's second law, along with work and energy and impulse momentum methods. Dynamics simulation software is used to reinforce the theory. Prerequisites: MECH2000 or MECH2400 and MATH1877 (4 credits) spring, summer
This course covers conduction, convection, and thermal radiation heat transfer mechanisms, as well as steady-state and transient conduction problems. It also discusses convective heat transfer mechanisms and various correlations to evaluate the heat transfer coefficient, along with heat exchanger analysis and thermal radiation heat transfer between surfaces. Prerequisites: MECH2250 and MECH3100 and MATH2600 (4 credits) summer
This course covers general theory of free, damping, and forced vibrations with one and two degrees of freedom; vibration suppression and isolation; and natural frequencies and mode shapes in continuous mechanical systems through analytical methods and numerical simulation. Prerequisites: MATH2600 and MECH2500 and MECH3850 (3 credits) spring
This course covers the kinematics and dynamics of machinery. While the course is on the topics of analysis of mechanisms and machines, it emphasizes also the use of computer-aided engineering as an approach to the design and analysis. Positional, velocity, acceleration, and force are considered in the traditional analysis of mechanisms and machines. The course is an ideal vehicle for introducing the mechanical engineering student to the process of design, since mechanisms tend to be intuitive for the typical mechanical engineering student to visualize and create. Prerequisite: MECH3850 (4 credits)
This 3-D computer aided design course provides experience in mechanical engineering simulation and design verification analysis. Finite Element Analysis of parts and assemblies are conducted. Prerequisite: MECH3000 (4 credits) spring
Studies vapor power systems including the Rankine cycle and its modifications for use with both fossil and nuclear fuels, vapor compression refrigeration systems, and all-gas cycles including the Brayton cycle and its modifications; the Otto cycle; the Diesel cycle; and supercharging and turbocharging. Introduces the concepts of energy and second law efficiency. Studies non-reacting mixtures with applications to air/water/vapor mixtures for air conditioning systems and cooling towers. Discusses the elements of optimum power plant design. Laboratory experiences enforce the classroom theory. Prerequisites: MECH2250 and MECH3100 and MECH3900 (3 credits)
Stress analysis, the development of strain, stress concentrations, failure theories and fatigue are studied. Shafts, gears, and other elements are also considered. Laboratory problems and appropriate projects are assigned. Prerequisites: MECH2500 and ELEC2850 and MATH2025 and MATH2100 (4 credits)
This capstone research-based course is for senior-level mechanical engineering students who will formulate a topic and initiate their capstone project for an innovative technological device or system. Students are encouraged to take an interdisciplinary approach to their design project with research directed by one or more faculty advisors. Prerequisite: Senior status (3 credits)
This capstone project course is for senior-level mechanical engineering students who will formulate a topic and develop a project for an innovative technological device or system. Students are encouraged to take an interdisciplinary approach to their design project, and the work will be performed under the direction of one or more faculty advisors. Course requirements include oral and written progress reports throughout the semester plus a final comprehensive technical report. Prerequisites: Senior status and MECH4200 (4 credits)
This course covers advanced aerodynamics with an emphasis on the analysis and design of aerospace vehicles, in particular fixed-wing, launch/atmospheric return vehicles. It also addresses rotating systems and focuses on the exact solutions of Navier Stokes equations. Other topics include integrated aerodynamics, high angle-of-attack aerodynamics, hypersonic shock, and expansion relations. (3 credits)
This course covers advanced topics in gas dynamics. The course starts with one-dimensional compressible flow. This is followed by a focus on the effect of compressibility on fluid in internal flow, including isentropic flow, normal and oblique shock waves, expansion fan, flows with heat transfer (Rayleigh line), and friction (Fano line). Several computational procedures, such as a non-iterative method to locate a normal shock in converging-diverging nozzles and in a constant area duct with friction, are introduced. (3 credits)
This course introduces students to the theory, analysis, and design of control systems, including mechanical, electromechanical, fluid, and thermal systems. It covers the modeling of control systems via differential equations and transfer functions, analysis of control systems in the time and frequency domains, stability, and feedback. It provides basic design tools, including root-locus, frequency response (bode plots), and state space methods. Students learn how to use computers for the analysis and design of control systems. (3 credits)
This course addresses predominant additive manufacturing (AM) technologies with an emphasis on related product applications. A contrast to traditional manufacturing processes, the concept of design freedom made available by AM is explored through the principles of design for additive manufacturing (DfAM). Lecture content is reinforced with the use of several commercial-scale 3D printers available to students.(3 credits)
This course provides design parameters as random variables and uses reliability as a measurement of component safe status to replace the traditional factor of safety in mechanical design. The course covers the following topics: fundamentals of probability theory; typical types of distributions; reliability computational methods; reliability calculation of a component under static and cyclic loads; component dimension design with required reliability; and introduction to system reliability. Simulation tools are used for reliability calculations and dimension design with required reliability. (3 credits)
This course is an introduction to the fundamental concepts required for the design and analysis of spark-ignition(SI) and compression-ignition (CI) internal combustion engines. Important design and operating parameters will be covered, such as compression ratio, fuel-air ratio, volumetric efficiency, ignition, and injection timing, mean effective pressure, and specific fuel consumption, as well as their effect on engine performance characteristics. The dynamics of the reciprocating motion of the piston/connecting rod/crankshaft will be analyzed, as well as the thermochemistry of combustion, fuel delivery, and gas exchange processes, with an emphasis on thermodynamic cycle simulation. This course will also discuss subsystems such as air and fuel delivery systems, cooling and lubrication systems, and exhaust system. (3 credits)
This course covers the computational methods of spatial mechanisms in kinematics and dynamics in order to solve real-world problems in the manipulation of robots. Students engage in the analysis of and solve problems related to positions, velocities, accelerations, actuating forces, and torques. (3 credits)
This course covers the kinematics, dynamics, and statics of machinery. It also emphasizes the use of computer-aided engineering as an approach to the design and analysis of planar mechanics. Position, velocity, acceleration, and force are considered in the vector and matrix form for analysis of mechanisms and machines. (3 credits)
This course provides students with fundamental knowledge of the theory of elasticity and plasticity. It covers the following topics: general stress and strain equations, equations of equilibrium and compatibility, and constitutive laws for elastic materials; the Airy stress function and its applications; plate bending; the basic three-dimensional theory of elasticity; and the basic theory of plasticity and yield criteria.(3 credits)
This course covers the basic concepts of rheology and the mechanical behavior of fluid systems in engineering applications. It studies rheometers and theoretical aspects of rheology, as well as the basic forces influencing complex fluids and rheology, including van der Waals, electrostatic, and other interactions. Students learn methods of characterizing structure, including scattering techniques, optical polarimetry, and microscopy. (3 credits)
This course introduces advanced topics in fluid mechanics, focusing on the mathematical and physical foundations of viscous flow dynamics. Continuity, Navier-Stokes, and energy equations are presented in the context of the differential control volume approach. Methods of boundary-layer flow solutions and turbulent flows in jets and wakes are also covered. (3 credits)
This course provides advanced knowledge of the behavior of materials. It covers the following topics: notches; fracture mechanics; mechanical behavior of metals, ceramics, polymers, and fiber-reinforced composites; creep; and fatigue. Methods for making materials are introduced in lecture; these include vacuum-bagging of composites and mold design for casting. In addition, simulation methods for evaluating the fatigue and creep behavior of materials are taught.(3 credits)
Source: Wentworth Institute of Technology's catalog, linked per course · table learning_unit · CourseShelf publish 61
