17 courses with the subject AUTO, each shown exactly as we captured it from the college's catalog, with every element we hold. Where the wording looks broken, that is our reading of the catalog, not the college's text.
AUTO 1000Orientation and Safety1
Credit(s) 1 credit lecture/0 credits lab This course covers Occupational Safety and Health Administration (OSHA) safety requirements, along with general shop procedures needed before entering the automotive lab. Orientation will include shop policies, location and utilization of appropriate safety equipment, including but not limited to eye-wash stations, fire extinguisher and exhaust ventilation systems.
Credit(s) 1 credit lecture/1 credit lab This course explores the careers available in the automotive industry. The purpose and identification of hand tools, special automotive tools, automotive shop, and diagnostic equipment, including tire mounting and balancing equipment, vehicle lifts, jacking equipment, and precision measuring devices will be discussed and demonstrated. Students will be provided the opportunity to demonstrate the safe and accurate use of those tools and equipment. General preventative maintenance and service procedures of the engine, drivetrain, and running gear will be addressed and performed. Automotive service information systems and other resources will be addressed and utilized.
Credit(s) 3 credits lecture/2 credits lab This course reviews the fundamentals of electricity and electronics as applied to the automotive industry. Topics addressed include the principles and theory of electricity, electrical terminology, electro-magnetism; including motors and induction, the principles of semi-conductors, basic automotive computer operation, including the operation of sensor, output or control signals, and data communication circuits. Also included in this course is the performance of accurate electrical measurements using a Digital Multi-meter (Volts, Ohms, Amps) and other appropriate tools; diagnosis and performance of electrical wiring repairs; and the understanding electrical system failures and basic diagnostic principles. Reading and interpreting vehicle service manual or electronic service information electrical wiring schematics will also be covered.
Credit(s) 0 credits lecture/0 credits lab/2 credits OJT This course will require 80 hours of documented on-the-job work/training to be performed in an instructor approved and contracted automotive service facility. This course provides an opportunity for the students to apply knowledge and skills gained in the first semester Automotive Technician program courses to the real world service and repair environment. The student will also be provided opportunities to demonstrate, practice, and develop industry standard soft skills, including communication, team work, maintaining high quality of work, and demonstrating good personal habits, attitude, judgement, and initiative.
Credit(s) 3 credits lecture/3 credits lab This course covers the theory of operation and common service procedures associated with major engine repair. This includes the standard measurements of the cylinder head and block assemblies to determine if machine work is needed, and exploration of how the new engine technology is adapted to hybrid vehicles.
Credit(s) 3 credits lecture/3 credits lab This course covers the construction and operational theory of automatic transmissions/transaxles; the complete disassemble and reassemble of two different automatic transmission/transaxles with all clutch pack clearances; end-play measurements; including proper use of special disassemble and reassembly tools; and access and interpret scan tool use and diagnostic procedures for evaluating the automatic transmission data.
Credit(s) 1 credit lecture/3 credits lab This course covers the operational theory and repair procedures of the drive train and axles of passenger cars and light duty trucks. Includes front drive and rear drive vehicles. Lab experiences provide an opportunity to service vehicles.
Credit(s) 1 credit lecture/3 credits lab This course covers the operational theory and repair of automotive suspension and steering systems. Two-wheel and four-wheel alignment process and adjustments will be addressed. Service procedures for manual, power, and electric steering systems will be covered. Lab experiences will provide an opportunity to service a variety of vehicles.
Credit(s) 2 credits lecture/2 credits lab This course covers the operational theory and repair of automotive brakes and braking systems; principles of hydraulics, disc, drum, and parking brake systems; and Anti-lock Brake Systems (ABS) and Traction Control (TC) basics. Lab experiences will provide an opportunity to service a variety of vehicles and systems.
Credit(s) 1 credit lecture/2 credits lab This course emphasizes the description, operation, diagnosis, and service procedures related to chassis electrical systems. This includes vehicle lighting, instrumentation, windshield wipers and washers, power door locks, windows, and mirrors as well as passive restraint systems. Major vehicle accessories and body control module integration and operation will also be covered. Finally, electrical circuit repairs and the understanding and interpreting of electrical system service information and schematics will be addressed.
Credit(s) 1 credit lecture/1 credit lab The description, operation, diagnosis, and service procedures related to automotive batteries will be addressed. The description, operation, diagnosis, and various service procedures related to automotive cranking motors and charging systems will be covered. Also included are descriptions of the various circuits used to control starter motor operation and charging system voltage regulation. Understanding and interpreting electrical system service information and schematics will also be addressed.
Credit(s) 1 credit lecture/3 credits lab This course covers the principles of automotive heating, ventilation and air conditioning (HVAC) and the fundamental service procedures used to repair and maintain those systems. As part of this course, students should be able to successfully complete the Automotive Service Excellence (ASE) Refrigerant Recovery and Recycling Certification Program in order to meet the EPA regulations and requirements, which are detailed in section 609 of the Clean Air Act of 1990. Lab experience provide the opportunity to diagnose, repair, and service vehicles.
AUTO 2183Fuel and Ignition Management Systems and Service6
Credit(s) 2 credits lecture/4 credits lab This course covers the description, operation, diagnosis, and service procedures related to automotive fuel, emission, and ignition systems and the interaction of these systems. The history and evolution of these vehicle systems will be addressed to provide a path to understand the technology currently in use. The automobile industry’s impact on emissions and the technology changes undergone to reduce these emissions is also addressed. Computer controls of these systems will be covered in detail as will the understanding and interpreting of drive-ability related service information, procedures, and schematics.
AUTO 2187Automotive Computer Systems and Driveability4
Credit(s) 1 credit lecture/3 credits lab This course covers the theory and operating principles of automotive computer systems. Topics may include but are not limited to: On Board Diagnostics (OBD), scan tool usage, input sensors, and computer controlled driveability systems. Lab experiences provide the opportunity to service vehicles.
Credit(s) 1 credit lecture/2 credits lab This course focuses on the knowledge and hand skills needed to proficient in the processes of plasma cutting, and oxy-fuel heating and cutting. This course covers hands-on training with the Gas Metal Arc Welding (GMAW) process, using short circuit transfer on carbon steels in all positions. Safety requirements covered.
AUTO 2460Hybrid and Electric Vehicle Service and Safety4
Credit(s) 2 credits lecture/2 credits lab This course focuses on the knowledge and hand skills needed to be proficient in the processes of Hybrid disabling and enabling, high voltage propulsion and safety awareness. This course covers hands-on training with thermal management, charging, high voltage isolation, and energy production.
AUTO 1000 , AUTO 1010 , and AUTO 1167 or instructor permission
AUTO 2480Light Vehicle Diesel Engines4
Credit(s) 2 credits lecture/2 credits lab This course covers the theory of operation and common service procedures associated with light vehicle diesel repair and maintenance. This includes diesel engine technology, fuel systems, intake and exhaust systems, emission controls service, and diagnostics.
