Cape Fear Community College · Courses

AUT

28 courses with the subject AUT, each shown exactly as we captured it from the college's catalog, with every element we hold. Where the wording looks broken, that is our reading of the catalog, not the college's text.

AUT 114INTRODUCTION TO PROGRAMMABLE

Subject: AUT
Type: course
Edition: 2026-2027
Source: catalog.suscc.edu

AUT 116Engine Repair

Subject: AUT
Type: course
Source: coursedog-pdfs-public-prod.s3.us-east-2.amazonaws.com

AUT 116AEngine Repair Lab

Subject: AUT
Type: course
Source: coursedog-pdfs-public-prod.s3.us-east-2.amazonaws.com

AUT 123Powertrain Diagnosis &

Subject: AUT
Type: course
Edition: 198154-undated-cfcc.edu
Source: coursedog-pdfs-public-prod.s3.us-east-2.amazonaws.com

AUT 130FUNDAMENTALS OF INDUSTRIAL

Subject: AUT
Type: course
Edition: 2026-2027
Source: catalog.suscc.edu

AUT 141Suspension & Steering

Subject: AUT
Type: course
Edition: 198154-undated-cfcc.edu
Source: coursedog-pdfs-public-prod.s3.us-east-2.amazonaws.com

AUT 141ASuspension &

Subject: AUT
Type: course
Edition: 198154-undated-cfcc.edu
Source: coursedog-pdfs-public-prod.s3.us-east-2.amazonaws.com

AUT 145INTRODUCTION TO MOLDING3

Students learn the fundamentals of molding operations, including molding terminology, machine part identification, operating safety, machine controls and machine startup and shutdown. Students are taught to identify common part defects such as short shots, flash, warp, surface defects, color changes and shrinkage. Students learn the properties of commonly used molding materials. Lab Hours: 0 Theory Hours: 3

Subject: AUT
Credits (min): 3
Credits (max): 3
Credit unit: Credits
Type: course
Edition: 2026-2027
Source: catalog.suscc.edu

AUT 146INTRODUCTION TO MOLDING LAB3

Students learn to safely operate a molding machine. Students learn to properly startup, set machine controls and shutdown a molding machine. Lab Hours: 6 Theory Hours: 0

Subject: AUT
Credits (min): 3
Credits (max): 3
Credit unit: Credits
Type: course
Edition: 2026-2027
Source: catalog.suscc.edu

AUT 151Brake Systems

Subject: AUT
Type: course
Source: coursedog-pdfs-public-prod.s3.us-east-2.amazonaws.com

AUT 151ABrakes Systems Lab

Subject: AUT
Type: course
Source: coursedog-pdfs-public-prod.s3.us-east-2.amazonaws.com

AUT 163Advanced Automotive

Subject: AUT
Type: course
Edition: 198154-undated-cfcc.edu
Source: coursedog-pdfs-public-prod.s3.us-east-2.amazonaws.com

AUT 163AAdvanced

Subject: AUT
Type: course
Edition: 198154-undated-cfcc.edu
Source: coursedog-pdfs-public-prod.s3.us-east-2.amazonaws.com

AUT 173MOLD SETTER SKILLS3

This course is designed to teach students basic mold setter skills. They will learn the fundamentals of molding operations, including molding terminology, machine part identification, operating safety, machine controls and machine startup and shutdown. Students are taught to identify common part defects such as non-fill, burn marks, warpage, discoloration, weld lines, and flash. At the end of this course students should be able to safely work as a mold setter. Lab Hours: 4 Theory Hours: 1

Subject: AUT
Credits (min): 3
Credits (max): 3
Credit unit: Credits
Type: course
Edition: 2026-2027
Source: catalog.suscc.edu

AUT 175MOLD SETTER SKILLS LAB3

This course is designed to teach students the basic mold setter skills in a laboratory environment. The students will learn the practical application of molding operations, including molding terminology, machine part identification, operating safety, machine controls, and machine startup and shutdown. Students are taught to identify and correct common part defects such as non-fill, burn marks, warpage, discoloration, weld lines, and flash. At the end of this course students should be able to work safely as a mold setter. Lab Hours: 6 Theory Hours: 0

Subject: AUT
Credits (min): 3
Credits (max): 3
Credit unit: Credits
Type: course
Edition: 2026-2027
Source: catalog.suscc.edu

AUT 181Engine Performance1

Subject: AUT
Credits (min): 1
Credits (max): 1
Type: course
Source: coursedog-pdfs-public-prod.s3.us-east-2.amazonaws.com

AUT 181AEngine Performance 1 Lab

Subject: AUT
Type: course
Edition: 198154-undated-cfcc.edu
Source: coursedog-pdfs-public-prod.s3.us-east-2.amazonaws.com

AUT 197Special Topics Machining2

198

Subject: AUT
Credits (min): 2
Credits (max): 2
Credit unit: Credits
Type: course
Edition: 2026-2027
Source: catalog.suscc.edu

AUT 200TOTAL PRODUCTIVE MAINTENANCE2

This course will provide students with the knowledge to do preventive maintenance on automation systems. Also assess tooling, inspect and perform preventive maintenance on various tools. This course provides both classroom and performance based hands on training to inform personnel on preventive maintenance. Lab Hours: 2 Theory Hours: 1

Subject: AUT
Credits (min): 2
Credits (max): 2
Credit unit: Credits
Type: course
Edition: 2026-2027
Source: catalog.suscc.edu

AUT 212Auto Shop

Subject: AUT
Type: course
Edition: 198154-undated-cfcc.edu
Source: coursedog-pdfs-public-prod.s3.us-east-2.amazonaws.com

AUT 212ROBOT OPERATION AND

Subject: AUT
Type: course
Edition: 2026-2027
Source: catalog.suscc.edu

AUT 213Automotive Servicing2

Subject: AUT
Credits (min): 2
Credits (max): 2
Type: course
Source: coursedog-pdfs-public-prod.s3.us-east-2.amazonaws.com

AUT 221Automatic

Subject: AUT
Type: course
Edition: 198154-undated-cfcc.edu
Source: coursedog-pdfs-public-prod.s3.us-east-2.amazonaws.com

AUT 221AAutomatic

Subject: AUT
Type: course
Edition: 198154-undated-cfcc.edu
Source: coursedog-pdfs-public-prod.s3.us-east-2.amazonaws.com

AUT 232Sensors Technology and Application3

Credits 3

Subject: AUT
Credits (min): 3
Credits (max): 3
Credit unit: Credits
Type: course
Edition: 2026-2027
Source: catalog.suscc.edu

AUT 273MOLD PROCESSING3

This course is designed to teach students basic mold processor skills. Topics will include safety, molding materials, machine controls, fill rates, temperature control, pressure control, and timing. Students will learn how various factors affect the mold process and how to compensate for those factors by setting and adjusting machine controls. Lab Hours: 4 Theory Hours: 1

Subject: AUT
Credits (min): 3
Credits (max): 3
Credit unit: Credits
Type: course
Edition: 2026-2027
Source: catalog.suscc.edu

AUT 275MOLD PROCESSING LAB3

This course is designed to teach students basic mold processor skills in a laboratory environment. The students will learn the practical application of mold processes including safety, molding materials, machine controls, fill rates, temperature control, pressure control and timing. Students will learn how various factors affect the mold process and how to compensate for those factors by setting and adjusting machine controls. Lab Hours: 6 Theory Hours: 0 Southern Union State Community College 2021-22 Catalog

Subject: AUT
Credits (min): 3
Credits (max): 3
Credit unit: Credits
Type: course
Edition: 2026-2027
Source: catalog.suscc.edu

AUT 281Advanced Engine

Subject: AUT
Type: course
Edition: 198154-undated-cfcc.edu
Source: coursedog-pdfs-public-prod.s3.us-east-2.amazonaws.com

Source: Cape Fear Community College's catalog, linked per course · table learning_unit · CourseShelf publish 61