14 courses with the subject SAGS, each shown exactly as we captured it from the college's catalog, with every element we hold. Where the wording looks broken, that is our reading of the catalog, not the college's text.
All work performed in University of Tennessee offices and administrative areas will be conducted using safe work practices. Office and administrative areas will be maintained free of recognized hazards.
The purpose of this procedure is to provide guidance for proper management of AEDs on campus.
To establish guidelines for the safe use of alternative vehicles while operating on university streets or property.
The purposes of these guidelines are to ensure that portable space heaters do not create a hazard to facility, employees, visitors or students.
This guide is intended to provide information for the proper selection and safe use of portable fans used for comfort, to provide temporary ventilation, to circulate air, or provide cooling.
This guideline has been developed to address falls and fall accidents that occur on the same walking surface, (interior and exterior) at the University of Tennessee, Knoxville.
The purpose of this program is to outline the fall protection requirements to minimize/eliminate fall related injuries. This Fall Protection Program prescribes the duty to provide fall protection; sets the criteria and practices for fall protection; and outlines required training and recordkeeping. This program is developed in accordance with the Occupational Safety and Health Administration (OSHA) re
The purpose of this procedure is to ensure that the ladders are operated on the University of Tennessee Knoxville campus following OSHA, and other federal, state, and local regulations.
This policy provides guidelines to ensure the proper selection, use, and care of PPE through work area hazard assessments and appropriate employee training.
According to OSHA there are approximately 18,000 amputations, lacerations, crushing injuries, and abrasions per year. There are also 800 deaths per year that are associated with improper or no machine guarding. The majority of these types of injuries and deaths could have been prevented by having proper machine guarding in place. A good rule to remember is: Any machine part, function, or process which The purpose of this document is to provide guidance on the need and solutions to proper machine guarding in the workplace.
This document serves as a guide to relevant regulatory requirement related to electrical workplace safety. The goal is to ensure that UTK employees understand and comply with the regulatory requirements of OSHA’s electrical standard (29 CFR 1910. Subpart S) and to protect all students, staff, faculty, and visitors on the UTK campus.
It shall be the policy of the University of Tennessee to following accepted standards and regulations to protect the health and well-being of its employees and students. The Occupational Safety and Health Administration’s (OSHA) Control of Hazardous Energy (also known as lockout/tagout) shall be implemented and followed by affected individuals.
To establish a program for safe entry into permit-required confined spaces at the UT Knoxville campus. This program establishes the controls and responsibilities for entering, working in, and exiting permit-required and non-permit required confined spaces in both general industry settings and in construction environments.
The purpose of this guide is to inform operators and supervisors of operators of their obligation to follow OSHA, NFPA, and other federal, state and local regulations pertaining to the use of powered industrial trucks and forklifts operated at the University of Tennessee, Knoxville. It also outlines training and evaluation procedures. As a guide, it is not a substitute for the regulations themselves,
Source: The University of Tennessee System Office's catalog, linked per course · table learning_unit · CourseShelf publish 59
