KSAWorks
KSAWorks
Knowledge • Skills • Abilities
Program checklist · AAS

Technical Studies, AAS

Brightpoint Community College · Chester, VA

A checklist is the list of requirements to complete this program and receive the award, as the college publishes it in its catalog. It is the same for everyone. It does not say what you have completed; that comes from applying your own record.

Program
Award
AAS
Credential class
ceterms:AssociateDegree
Credits (computed from items)
9
Catalog edition
2026-2027
Checklist type
degree-program
Identifiers
IPEDS UNITID
232450
CourseShelf checklist
CK_232450_bf724729
CollegeTransfer.Net
Institution Transfer Profile
Source
CourseShelf publish 59

Requirements to complete

Every course or condition the catalog lists, in the catalog's order.

Required Courses

3 items
  1. SDV 100
    College Success Skills
    As published: “College Success Skills 1 credit”
    1
  2. ENG 115
    Technical Writing
    As published: “Technical Writing 3 credits Additional Course Options: ENG 111 .”
    3
  3. MTH 111
    Basic Technical Mathematics
    As published: “Basic Technical Mathematics 3 credits Additional Course Options: MTH 130 , MTH 154 , BIO 101 , CHM 101 , ENV 121 , PHY 101 , CHM 111 , MTH 161 , MTH 162 , MTH 261 , MTH 263 , PHY 201 , PHY 241 .”
    3

Social/Behavioral Sciences Elective

6 items
  1. Choose 1: Credits /
    Not resolved to a course
    3
  2. PSY 200
    Principles of Psychology
    As published: “Principles of Psychology 3 credits”
    3
  3. SOC 200
    Introduction to Sociology
    As published: “Introduction to Sociology 3 credits”
    3
  4. SOC 211
    Cultural Anthropology
    As published: “Cultural Anthropology 3 credits”
    3
  5. ECO 201
    Principles of Macroeconomics
    As published: “Principles of Macroeconomics 3 credits”
    3
  6. ECO 202
    Principles of Microeconomics
    As published: “Principles of Microeconomics 3 credits”
    3

Arts/Humanities Elective

7 items
  1. Choose 1: Credits /
    Not resolved to a course
    3
  2. PHI 100
    Introduction to Philosophy
    As published: “Introduction to Philosophy 3 credits”
    3
  3. PHI 220
    Ethics and Society
    As published: “Ethics and Society 3 credits”
    3
  4. ART 101
    History of Art: Prehistoric to Gothic
    As published: “History of Art: Prehistoric to Gothic 3 credits”
    3
  5. ART 102
    History of Art: Renaissance to Modern
    As published: “History of Art: Renaissance to Modern 3 credits”
    3
  6. REL 100
    Introduction to the Study of Religion
    As published: “Introduction to the Study of Religion 3 credits”
    3
  7. REL 230
    Religions of the World
    As published: “Religions of the World 3 credits”
    3

Approved Elective

13 items
  1. Choose 1: Credits /
    Not resolved to a course
    3
  2. SOC 200
    Introduction to Sociology
    As published: “Introduction to Sociology 3 credits”
    3
  3. SOC 211
    Cultural Anthropology
    As published: “Cultural Anthropology 3 credits”
    3
  4. PSY 200
    Principles of Psychology
    As published: “Principles of Psychology 3 credits”
    3
  5. ECO 201
    Principles of Macroeconomics
    As published: “Principles of Macroeconomics 3 credits”
    3
  6. ECO 202
    Principles of Microeconomics
    As published: “Principles of Microeconomics 3 credits”
    3
  7. PHI 100
    Introduction to Philosophy
    As published: “Introduction to Philosophy 3 credits”
    3
  8. PHI 220
    Ethics and Society
    As published: “Ethics and Society 3 credits”
    3
  9. ART 101
    History of Art: Prehistoric to Gothic
    As published: “History of Art: Prehistoric to Gothic 3 credits”
    3
  10. ART 102
    History of Art: Renaissance to Modern
    As published: “History of Art: Renaissance to Modern 3 credits”
    3
  11. REL 100
    Introduction to the Study of Religion
    As published: “Introduction to the Study of Religion 3 credits”
    3
  12. REL 230
    Religions of the World
    As published: “Religions of the World 3 credits”
    3
  13. ENG 112
    College Composition II
    As published: “College Composition II 3 credits (ENG 111 is a prerequisite for ENG 112)”
    3

Technical Track Courses

0 items

    Pre-Approved Computer-Aided Drafting & Modeling Track: 46 Credits

    0 items

      Pre-Approved Technical Core Courses: 22 credits

      9 items
      1. ITE 152
        Introduction to Digital Literacy and Computer Applications
        As published: “Introduction to Digital Literacy and Computer Applications 3 credits”
        3
      2. CAD 151
        Engineering Drawing Fundamentals I
        As published: “Engineering Drawing Fundamentals I 3 credits”
        3
      3. Additional Course Option: CAD 201
        Not resolved to a course
      4. SAF 130
        Industrial Safety – OSHA 10
        As published: “Industrial Safety – OSHA 10 1 credit”
        1
      5. IND 101
        Quality Assurance Technology I
        As published: “Quality Assurance Technology I 3 credits Additional course option: BUS 208 .”
        3
      6. IND 116
        Applied Technology
        As published: “Applied Technology 3 credits”
        3
      7. IND 137
        Team Concepts and Problem Solving
        As published: “Team Concepts and Problem Solving 3 credits”
        3
      8. IND 197
        Cooperative Education
        As published: “Cooperative Education 3 credits Additional course option: IND 198 .”
        3
      9. IND 297
        Cooperative Education
        As published: “Cooperative Education 1 - 5 credits Additional course option: IND 298 .”
        1-5

      Pre-Approved CAD Classes (CAD and Modeling CSC): 24 credits

      8 items
      1. CAD 202
        Computer Aided Drafting and Design II
        As published: “Computer Aided Drafting and Design II 3 credits”
        3
      2. CAD 231
        Computer Aided Drafting I
        As published: “Computer Aided Drafting I 3 credits Additional course option: CAD 260 .”
        3
      3. CAD 241
        Parametric Solid Modeling I
        As published: “Parametric Solid Modeling I 3 credits”
        3
      4. CAD 242
        Parametric Solid Modeling ll
        As published: “Parametric Solid Modeling ll 3 credits”
        3
      5. ARC 221
        Architectural CAD Applications Software I
        As published: “Architectural CAD Applications Software I 3 credits”
        3
      6. ARC 222
        Architectural CAD Applications Software II
        As published: “Architectural CAD Applications Software II 3 credits”
        3
      7. MAC 150
        Introduction to Computer-Aided Manufacturing
        As published: “Introduction to Computer-Aided Manufacturing 3 credits Additional course option: GIS 101 .”
        3
      8. ARC 258
        Building Codes, Contract Documents and Professional Office Practices
        As published: “Building Codes, Contract Documents and Professional Office Practices 3 credits Additional course option: CIV 171 , GIS 102 .”
        3

      Pre-Approved Heating, Ventilation and Air Conditioning Track: 44 Credits

      0 items

        Pre-Approved Technical Core Courses: 22 credits

        9 items
        1. ITE 152
          Introduction to Digital Literacy and Computer Applications
          As published: “Introduction to Digital Literacy and Computer Applications 3 credits”
          3
        2. CAD 151
          Engineering Drawing Fundamentals I
          As published: “Engineering Drawing Fundamentals I 3 credits”
          3
        3. Additional Course Option: CAD 201
          Not resolved to a course
        4. SAF 130
          Industrial Safety – OSHA 10
          As published: “Industrial Safety – OSHA 10 1 credit”
          1
        5. IND 101
          Quality Assurance Technology I
          As published: “Quality Assurance Technology I 3 credits Additional Course Options: BUS 208 .”
          3
        6. IND 116
          Applied Technology
          As published: “Applied Technology 3 credits”
          3
        7. IND 137
          Team Concepts and Problem Solving
          As published: “Team Concepts and Problem Solving 3 credits”
          3
        8. IND 197
          Cooperative Education
          As published: “Cooperative Education 3 credits Additional Course Options: IND 198 .”
          3
        9. IND 297
          Cooperative Education
          As published: “Cooperative Education 1 - 5 credits Additional Course Options: IND 298 .”
          1-5

        Pre-Approved HVAC Track Classes (Heating and Air Conditioning CSC): 22 credits

        7 items
        1. AIR 121
          Air Conditioning and Refrigeration I
          As published: “Air Conditioning and Refrigeration I 3 credits”
          3
        2. AIR 122
          Air Conditioning and Refrigeration II
          As published: “Air Conditioning and Refrigeration II 3 credits”
          3
        3. AIR 134
          Circuits and Controls I
          As published: “Circuits and Controls I 3 credits”
          3
        4. AIR 154
          Heating Systems I
          As published: “Heating Systems I 3 credits”
          3
        5. ELE 131
          National Electrical Code I
          As published: “National Electrical Code I 3 credits”
          3
        6. ELE 150
          A.C. and D.C. Circuit Fundamentals
          As published: “A.C. and D.C. Circuit Fundamentals 4 credits”
          4
        7. ELE 159
          Electrical Motors
          As published: “Electrical Motors 3 credits”
          3

        Pre-Approved Industrial Electricity Track: 44 Credits

        0 items

          Pre-Approved Technical Core Courses: 22 credits

          9 items
          1. ITE 152
            Introduction to Digital Literacy and Computer Applications
            As published: “Introduction to Digital Literacy and Computer Applications 3 credits”
            3
          2. CAD 151
            Engineering Drawing Fundamentals I
            As published: “Engineering Drawing Fundamentals I 3 credits”
            3
          3. Additional Course Option: CAD 201
            Not resolved to a course
          4. SAF 130
            Industrial Safety – OSHA 10
            As published: “Industrial Safety – OSHA 10 1 credit”
            1
          5. IND 101
            Quality Assurance Technology I
            As published: “Quality Assurance Technology I 3 credits Additional Course Options: BUS 208 .”
            3
          6. IND 116
            Applied Technology
            As published: “Applied Technology 3 credits”
            3
          7. IND 137
            Team Concepts and Problem Solving
            As published: “Team Concepts and Problem Solving 3 credits”
            3
          8. IND 197
            Cooperative Education
            As published: “Cooperative Education 3 credits Additional Course Options: IND 198 .”
            3
          9. IND 297
            Cooperative Education
            As published: “Cooperative Education 1 - 5 credits Additional Course Options: IND 298 .”
            1-5

          Pre-Approved Industrial Electricity Track Classes (Industrial Electricity CSC): 22 credits

          7 items
          1. ELE 133
            Practical Electricity l
            As published: “Practical Electricity l 3 credits”
            3
          2. ELE 137
            National Electrical Code - Industrial
            As published: “National Electrical Code - Industrial 3 credits”
            3
          3. ELE 150
            A.C. and D.C. Circuit Fundamentals
            As published: “A.C. and D.C. Circuit Fundamentals 4 credits”
            4
          4. ELE 156
            Electrical Control Systems
            As published: “Electrical Control Systems 3 credits”
            3
          5. ELE 159
            Electrical Motors
            As published: “Electrical Motors 3 credits”
            3
          6. ELE 239
            Programmable Controllers
            As published: “Programmable Controllers 3 credits”
            3
          7. ELE 240
            Advanced Programmable Logic Controllers
            As published: “Advanced Programmable Logic Controllers 3 credits”
            3

          Pre-Approved Industrial Maintenance Track: 45 Credits

          0 items

            Pre-Approved Technical Core Courses: 22 credits

            9 items
            1. ITE 152
              Introduction to Digital Literacy and Computer Applications
              As published: “Introduction to Digital Literacy and Computer Applications 3 credits”
              3
            2. CAD 151
              Engineering Drawing Fundamentals I
              As published: “Engineering Drawing Fundamentals I 3 credits”
              3
            3. Additional Course Option: CAD 201
              Not resolved to a course
            4. SAF 130
              Industrial Safety – OSHA 10
              As published: “Industrial Safety – OSHA 10 1 credit”
              1
            5. IND 101
              Quality Assurance Technology I
              As published: “Quality Assurance Technology I 3 credits Additional Course Options: BUS 208 .”
              3
            6. IND 116
              Applied Technology
              As published: “Applied Technology 3 credits”
              3
            7. IND 137
              Team Concepts and Problem Solving
              As published: “Team Concepts and Problem Solving 3 credits”
              3
            8. IND 197
              Cooperative Education
              As published: “Cooperative Education 3 credits Additional Course Options: IND 198 .”
              3
            9. IND 297
              Cooperative Education
              As published: “Cooperative Education 1 - 5 credits Additional Course Options: IND 298 .”
              1-5

            Pre-Approved Industrial Maintenance Track Classes (Industrial Maintenance CSC): 23 credits

            8 items
            1. MAC 131
              Machine Lab I
              As published: “Machine Lab I 2 credits”
              2
            2. MAC 181
              Machine Blueprint Reading I
              As published: “Machine Blueprint Reading I 3 credits”
              3
            3. ELE 150
              A.C. and D.C. Circuit Fundamentals
              As published: “A.C. and D.C. Circuit Fundamentals 4 credits”
              4
            4. ELE 159
              Electrical Motors
              As published: “Electrical Motors 3 credits”
              3
            5. MEC 161
              Basic Fluid Mechanics - Hydraulics/Pneumatics
              As published: “Basic Fluid Mechanics - Hydraulics/Pneumatics 3 credits”
              3
            6. WEL 120
              Introduction to Welding
              As published: “Introduction to Welding 2 credits”
              2
            7. MEC 154
              Mechanical Maintenance I
              As published: “Mechanical Maintenance I 3 credits”
              3
            8. MEC 254
              Mechanical Maintenance II
              As published: “Mechanical Maintenance II 3 credits”
              3

            Pre-Approved Precision Machining Technology Computer Numerical Control Track: 44 Credits

            0 items

              Pre-Approved Technical Core Courses: 22 credits

              8 items
              1. ITE 152
                Introduction to Digital Literacy and Computer Applications
                As published: “Introduction to Digital Literacy and Computer Applications 3 credits”
                3
              2. MAC 150
                Introduction to Computer-Aided Manufacturing
                As published: “Introduction to Computer-Aided Manufacturing 3 credits”
                3
              3. SAF 130
                Industrial Safety – OSHA 10
                As published: “Industrial Safety – OSHA 10 1 credit”
                1
              4. IND 101
                Quality Assurance Technology I
                As published: “Quality Assurance Technology I 3 credits Additional Course Options: BUS 208 .”
                3
              5. IND 116
                Applied Technology
                As published: “Applied Technology 3 credits”
                3
              6. IND 137
                Team Concepts and Problem Solving
                As published: “Team Concepts and Problem Solving 3 credits”
                3
              7. IND 197
                Cooperative Education
                As published: “Cooperative Education 3 credits Additional Course Options: IND 198 .”
                3
              8. IND 297
                Cooperative Education
                As published: “Cooperative Education 1 - 5 credits Additional Course Options: IND 298 .”
                1-5

              Pre-Approved Computer Numerical Control Track Classes (Computer Numerical Control CSC): 22 credits

              8 items
              1. MAC 181
                Machine Blueprint Reading I
                As published: “Machine Blueprint Reading I 3 credits”
                3
              2. MAC 121
                Computer Numerical Control I
                As published: “Computer Numerical Control I 3 credits”
                3
              3. MAC 122
                Computer Numerical Control II
                As published: “Computer Numerical Control II 3 credits”
                3
              4. MAC 123
                Computer Numerical Control III
                As published: “Computer Numerical Control III 3 credits”
                3
              5. MAC 130
                Introduction to Electric Discharge Machining (EDM)
                As published: “Introduction to Electric Discharge Machining (EDM) 2 credits”
                2
              6. MAC 134
                CMM Operation and Programming
                As published: “CMM Operation and Programming 2 credits”
                2
              7. MAC 161
                Machine Shop Practices I
                As published: “Machine Shop Practices I 3 credits”
                3
              8. MAC 162
                Machine Shop Practices II
                As published: “Machine Shop Practices II 3 credits”
                3

              Pre-Approved Residential Electricity Track: 44 Credits

              0 items

                Pre-Approved Technical Core Courses: 22 credits

                9 items
                1. ITE 152
                  Introduction to Digital Literacy and Computer Applications
                  As published: “Introduction to Digital Literacy and Computer Applications 3 credits”
                  3
                2. CAD 151
                  Engineering Drawing Fundamentals I
                  As published: “Engineering Drawing Fundamentals I 3 credits”
                  3
                3. Additional Course Option: CAD 201
                  Not resolved to a course
                4. SAF 130
                  Industrial Safety – OSHA 10
                  As published: “Industrial Safety – OSHA 10 1 credit”
                  1
                5. IND 101
                  Quality Assurance Technology I
                  As published: “Quality Assurance Technology I 3 credits Additional Course Options: BUS 208 .”
                  3
                6. IND 116
                  Applied Technology
                  As published: “Applied Technology 3 credits”
                  3
                7. IND 137
                  Team Concepts and Problem Solving
                  As published: “Team Concepts and Problem Solving 3 credits”
                  3
                8. IND 197
                  Cooperative Education
                  As published: “Cooperative Education 3 credits Additional Course Options: IND 198 .”
                  3
                9. IND 297
                  Cooperative Education
                  As published: “Cooperative Education 1 - 5 credits Additional Course Options: IND 298 .”
                  1-5

                Pre-Approved Residential Electricity Track Classes (Residential Electricity CSC): 22 credits

                7 items
                1. ELE 110
                  Home Electric Power
                  As published: “Home Electric Power 3 credits”
                  3
                2. ELE 133
                  Practical Electricity l
                  As published: “Practical Electricity l 3 credits”
                  3
                3. ELE 127
                  Residential Wiring Methods
                  As published: “Residential Wiring Methods 3 credits”
                  3
                4. ELE 131
                  National Electrical Code I
                  As published: “National Electrical Code I 3 credits”
                  3
                5. ELE 138
                  National Electrical Code Review I
                  As published: “National Electrical Code Review I 3 credits”
                  3
                6. ELE 150
                  A.C. and D.C. Circuit Fundamentals
                  As published: “A.C. and D.C. Circuit Fundamentals 4 credits”
                  4
                7. ELE 151
                  Electrical Troubleshooting
                  As published: “Electrical Troubleshooting 3 credits”
                  3

                Pre-Approved Welding Track: 45 Credits

                0 items

                  Pre-Approved Technical Core Courses: 22 credits

                  9 items
                  1. ITE 152
                    Introduction to Digital Literacy and Computer Applications
                    As published: “Introduction to Digital Literacy and Computer Applications 3 credits”
                    3
                  2. CAD 151
                    Engineering Drawing Fundamentals I
                    As published: “Engineering Drawing Fundamentals I 3 credits”
                    3
                  3. Additional Course Option: CAD 201
                    Not resolved to a course
                  4. SAF 130
                    Industrial Safety – OSHA 10
                    As published: “Industrial Safety – OSHA 10 1 credit”
                    1
                  5. IND 101
                    Quality Assurance Technology I
                    As published: “Quality Assurance Technology I 3 credits Additional Course Options: BUS 208 .”
                    3
                  6. IND 116
                    Applied Technology
                    As published: “Applied Technology 3 credits”
                    3
                  7. IND 137
                    Team Concepts and Problem Solving
                    As published: “Team Concepts and Problem Solving 3 credits”
                    3
                  8. IND 197
                    Cooperative Education
                    As published: “Cooperative Education 3 credits Additional Course Options: IND 198 .”
                    3
                  9. IND 297
                    Cooperative Education
                    As published: “Cooperative Education 1 - 5 credits Additional Course Options: IND 298 .”
                    1-5

                  Pre-Approved Welding Courses (Welding CSC): 23 credits

                  9 items
                  1. WEL 120
                    Introduction to Welding
                    As published: “Introduction to Welding 2 credits”
                    2
                  2. WEL 123
                    Shielded Metal Arc Welding (Basic)
                    As published: “Shielded Metal Arc Welding (Basic) 3 credits”
                    3
                  3. WEL 150
                    Welding Drawing and Interpretation
                    As published: “Welding Drawing and Interpretation 2 credits”
                    2
                  4. WEL 160
                    Gas Metal Arc Welding
                    As published: “Gas Metal Arc Welding 3 credits”
                    3
                  5. WEL 161
                    Flux Cored Are Welding (FCAW)
                    As published: “Flux Cored Are Welding (FCAW) 3 credits”
                    3
                  6. WEL 164
                    Gas Tungsten Arc Welding (GTAW), Tungsten Inert Gas (TIG)
                    As published: “Gas Tungsten Arc Welding (GTAW), Tungsten Inert Gas (TIG) 3 credits”
                    3
                  7. WEL 247
                    Welding Layout and Fabrication I
                    As published: “Welding Layout and Fabrication I 2 credits”
                    2
                  8. WEL 248
                    Welding Layout and Fabrication II
                    As published: “Welding Layout and Fabrication II 2 credits”
                    2
                  9. CAD 202
                    Computer Aided Drafting and Design II
                    As published: “Computer Aided Drafting and Design II 3 credits Additional Restricted Technical Elective 3-4 credits (choose 1) ELE 133 ELE 150 MEC 154 MAC 150 .”
                    3

                  Pre-Approved Precision Machining Technology Track: 45 Credits

                  0 items

                    Pre-Approved Technical Core Courses: 22 credits

                    7 items
                    1. ITE 152
                      Introduction to Digital Literacy and Computer Applications
                      As published: “Introduction to Digital Literacy and Computer Applications 3 credits”
                      3
                    2. SAF 130
                      Industrial Safety – OSHA 10
                      As published: “Industrial Safety – OSHA 10 1 credit”
                      1
                    3. IND 101
                      Quality Assurance Technology I
                      As published: “Quality Assurance Technology I 3 credits Additional Course Options: BUS 208 .”
                      3
                    4. IND 116
                      Applied Technology
                      As published: “Applied Technology 3 credits”
                      3
                    5. IND 137
                      Team Concepts and Problem Solving
                      As published: “Team Concepts and Problem Solving 3 credits”
                      3
                    6. IND 197
                      Cooperative Education
                      As published: “Cooperative Education 3 credits Additional Course Options: IND 198 .”
                      3
                    7. IND 297
                      Cooperative Education
                      As published: “Cooperative Education 1 - 5 credits Additional Course Options: IND 298 .”
                      1-5

                    Pre-Approved Precision Machining Technology Track Classes (Basic Precision Machining Technology CSC): 23 credits

                    8 items
                    1. MAC 121
                      Computer Numerical Control I
                      As published: “Computer Numerical Control I 3 credits”
                      3
                    2. MAC 122
                      Computer Numerical Control II
                      As published: “Computer Numerical Control II 3 credits”
                      3
                    3. MAC 123
                      Computer Numerical Control III
                      As published: “Computer Numerical Control III 3 credits”
                      3
                    4. MAC 161
                      Machine Shop Practices I
                      As published: “Machine Shop Practices I 3 credits”
                      3
                    5. MAC 162
                      Machine Shop Practices II
                      As published: “Machine Shop Practices II 3 credits”
                      3
                    6. MAC 163
                      Machine Shop Practices III
                      As published: “Machine Shop Practices III 3 credits”
                      3
                    7. MAC 164
                      Machine Shop Practices IV
                      As published: “Machine Shop Practices IV 3 credits”
                      3
                    8. MAC 130
                      Introduction to Electric Discharge Machining (EDM)
                      As published: “Introduction to Electric Discharge Machining (EDM) 2 credits Additional Course Options: MAC 134 .”
                      2

                    Pre-Approved Energy Track: 45 Credits

                    0 items

                      Pre-Approved Technical Core Courses: 19 credits

                      8 items
                      1. ITE 152
                        Introduction to Digital Literacy and Computer Applications
                        As published: “Introduction to Digital Literacy and Computer Applications 3 credits”
                        3
                      2. CAD 151
                        Engineering Drawing Fundamentals I
                        As published: “Engineering Drawing Fundamentals I 3 credits”
                        3
                      3. Additional Course Option: CAD 201
                        Not resolved to a course
                      4. SAF 130
                        Industrial Safety – OSHA 10
                        As published: “Industrial Safety – OSHA 10 1 credit”
                        1
                      5. IND 116
                        Applied Technology
                        As published: “Applied Technology 3 credits”
                        3
                      6. IND 137
                        Team Concepts and Problem Solving
                        As published: “Team Concepts and Problem Solving 3 credits”
                        3
                      7. IND 197
                        Cooperative Education
                        As published: “Cooperative Education 3 credits Additional Course Options: IND 198 .”
                        3
                      8. IND 297
                        Cooperative Education
                        As published: “Cooperative Education 1 - 5 credits Additional Course Options: IND 298 .”
                        1-5

                      Pre-Approved Energy Track Classes (Energy Technology CSC): 26 credits

                      8 items
                      1. MEC 195
                        Mechanical Engineering Technology Laboratory
                        As published: “Mechanical Engineering Technology Laboratory 2 credits”
                        2
                      2. ELE 150
                        A.C. and D.C. Circuit Fundamentals
                        As published: “A.C. and D.C. Circuit Fundamentals 4 credits”
                        4
                      3. ENE 104
                        Energy Industry Fundamentals
                        As published: “Energy Industry Fundamentals 4 credits”
                        4
                      4. MEC 154
                        Mechanical Maintenance I
                        As published: “Mechanical Maintenance I 3 credits”
                        3
                      5. AIR 121
                        Air Conditioning and Refrigeration I
                        As published: “Air Conditioning and Refrigeration I 3 credits”
                        3
                      6. ELE 159
                        Electrical Motors
                        As published: “Electrical Motors 3 credits”
                        3
                      7. MEC 161
                        Basic Fluid Mechanics - Hydraulics/Pneumatics
                        As published: “Basic Fluid Mechanics - Hydraulics/Pneumatics 3 credits”
                        3
                      8. ENE 100
                        Conventional and Alternate Energy Applications
                        As published: “Conventional and Alternate Energy Applications 4 credits”
                        4
                      Source. Brightpoint Community College, catalog 2026-2027 — https://catalog.brightpoint.edu/preview_program.php?catoid=12&poid=1411. Captured page pages/0067.html.gz. Assembled from the institution's published catalog as captured; every record names its captured page and source URL. Assembled, not asserted.