21 courses with the subject CRT, each shown exactly as we captured it from the college's catalog, with every element we hold. Where the wording looks broken, that is our reading of the catalog, not the college's text.
Introduction to Collision Repair Introduces the student to safety, sanding, grinding, pulling, roughing and filling: the use of tools and equipment; and preparing and priming automotive panels through lectures and demonstration. Lecture: 2 credits (30 contact hours). Attributes: Technical Components: LEC: Lecture
This course provides instruction in the identification, preparation, and repair of automotive plastics and the proper selection and application of structural and non-structural adhesives and sealers used in collision repair. Students learn plastic identification methods, surface preparation techniques, repair procedures for thermoplastic and thermoset materials, and refinishing considerations. Instruction includes adhesive bonding principles, OEM-approved bonding and riveting procedures, corrosion protection, seam sealing, sound deadening materials, and proper curing methods. Emphasis is placed on safety, material handling, manufacturer repair guidelines, and quality control standards. Lecture 2 hours per week.
This course introduces students to the foundational principles, tools, equipment, materials, and safety practices used in the automotive collision repair industry. Instruction includes shop safety and hazard communication, personal protective equipment (PPE), hand and power tool identification and use, vehicle construction fundamentals, fastener systems, corrosion protection, and basic metal and plastic repair techniques. Students develop skills in damage identification, repair-planning fundamentals, and proper shop-workflow procedures. Lecture 3 hours per week.
This course provides instruction in the analysis and repair of non-structural (cosmetic and bolt-on) collision damage. Students develop skills in damage assessment, repair planning fundamentals, panel removal and replacement, metal straightening techniques, body filler application, and surface preparation. Instruction includes welding fundamentals for non-structural components, corrosion protection, use of specialty tools and equipment, and proper alignment of bolt-on panels to restore fit and finish. Emphasis is placed on following manufacturer repair procedures, maintaining safety standards, and producing repairs that meet industry quality expectations. Lecture: 2 hours and Laboratory: 6 hours per week.
This course provides foundational instruction in automotive color theory as it applies to collision refinishing. Students study the principles of color identification, color mixing, hue, value, chroma, undertone analysis, and the effects of light on color perception. Instruction includes paint system components, tinting and blending techniques, metallic and pearl orientation, color matching strategies, and defect analysis. Students develop skills in formula selection, spray-out panel evaluation, and correction procedures to achieve accurate color match and finish consistency. Lecture 2 hours per week.
This course provides instruction in systematic collision damage analysis and the development of accurate, industry-standard repair estimates. Students learn blueprinting procedures, vehicle identification and option decoding, parts identification, labor operation research, and repair versus replace decision-making. Instruction includes use of computerized estimating systems, OEM repair procedure research, documentation of pre- and post-repair scanning requirements, and supplement preparation. Emphasis is placed on thorough damage documentation, cost analysis, communication with customers and insurers, and adherence to manufacturer guidelines and ethical estimating practices. Lecture 3 hours per week.
This course provides comprehensive instruction in automotive surface preparation, paint application, and finish correction procedures used in modern collision repair facilities. Students learn proper substrate identification and preparation, masking techniques, primer application, sanding methods, and sealer application. Instruction includes spray gun setup and adjustment, paint mixing and material handling, basecoat/clearcoat systems, blending techniques, and defect identification and correction. Emphasis is placed on safety, environmental compliance, manufacturer specifications, spray booth operations, and achieving industry-quality finish standards. Lecture: 3 hours and Laboratory: 6 hours per week.
This course provides instruction in the theory and application of mechanical and welded attachment methods used in automotive collision repair. Students learn identification and selection of fasteners, weld types, and joining processes appropriate for modern vehicle construction. Instruction includes removal and installation of threaded fasteners, rivets, clips, and specialty hardware; fundamentals of resistance spot welding, GMAW (MIG) welding, and plug weld techniques; and proper use of weld-through primers and corrosion protection materials. Emphasis is placed on manufacturer repair procedures, heat control, weld quality evaluation, joint strength, and workplace safety. Lecture 2 hours and Laboratory 4 hours per week.
Non-Structural Analysis and Damage Repair Provides instruction in the replacement and alignment of bolts on automotive parts such as doors, hood, and fenders; as well as instruction on the repair and replacement of non-structural weld-on automotive panels by aligning, welding, cutting and drilling through demonstrations and lectures. Includes instruction on how to repair plastic, fiberglass, SMC and flexible automobile parts. Lecture: 6 credits (90 contact hours). Attributes: Technical Components: LEC: Lecture
Title: Non-Structural Analysis and Damage Repair Lab; Credits: 6
Painting and Refinishing Provides instruction in the use of lacquer, acrylic enamel and base coat/clear coat refinishing products, masking procedures, preparations and paint problems. Lecture: 6 credits (90 contact hours). Attributes: Technical Components: LEC: Lecture
Title: Painting and Refinishing Lab; Credits: 6
Title: Practicum; Credits: 1
Structural Analysis and Damage Repair Presents instruction on the analysis, repair and replacement of structural panels on unibody automobiles and body and frame alignment on unibody and frame cars. Lecture: 6 credits (90 contact hours). Attributes: Technical Components: LEC: Lecture
Title: Structural Analysis and Damage Repair Lab; Credits: 6
Mechanical and Electrical Components Provides instruction in the diagnosis, repair, and/or replacement of suspension, steering, electrical, brake, drive train, fuel, exhaust, and restraint systems. Includes theories and concepts of heating and air conditioning systems. Lecture: 6 credits (90 contact hours). Attributes: Technical Components: LEC: Lecture
Title: Mechanical and Electrical Components Lab; Credits: 6
Advanced Practicum Provides supervised on-the-job work experience related to the students' education objectives. (Students participating in the practicum do not receive compensation.) Independent Study: 2 credits (150 contact hours). Pre-requisite: Consent of Instructor. Attributes: Technical Components: IND: Independent Study
Advanced Cooperative Education Provides supervised on-the-job work experience related to the students' educational objectives. (Students participating in the Co-op Education program receive compensation for their work.) Co-Op: 2 credits (150 contact hours). Pre-requisite: Consent of Instructor. Attributes: Technical Components: COP: Co-op
Source: Shepherds Theological Seminary's catalog, linked per course · table learning_unit · CourseShelf publish 61
