Institute of Medical Careers · Courses

WLD

14 courses with the subject WLD, each shown exactly as we captured it from the college's catalog, with every element we hold. Where the wording looks broken, that is our reading of the catalog, not the college's text.

WLD 005Oxy-Fuel Welding Fundamentals

and Safety 60 4

Subject: WLD
Type: course
Edition: 2026
Source: imbc.edu

WLD 010Oxy-Fuel Welding Methods

and Practices 60 4

Subject: WLD
Type: course
Edition: 2026
Source: imbc.edu

WLD 015Safety in Welding, Cutting

and Allied Processes 60 4

Subject: WLD
Type: course
Edition: 2026
Source: imbc.edu

WLD 100SMAW Fundamentals and Safety

4 Quarter Credits t Pre-requisites: WLD005 Course Description: Students will learn the proper safety pro- cedures and techniques used in the Shielded Metal Arc-Weld- ing process. An emphasis will be placed on “safe” setup and operation of arc-welding equipment. Students will learn proper apparel for Shielded Metal Arc-Welding, fundamentals of AC and DC welding current, various power sources, electrode coating and identification, destructive and non-destructive testing proce- dures, and proper arc striking techniques. Additional blue-print reading skills will be integrated and emphasized along with con- tinued attention to weld symbols. Safety standards are done in compliance with ANSI Z49.1 Safety in Welding, Cutting and Allied Processes.

Subject: WLD
Type: course
Edition: 2026
Source: imbc.edu

WLD 101SMAW Methods and Practices

4 Quarter Credits Course Description: Students will be introduced to the principles of joint preparation in a guided practice environment with class- room instruction followed by instructor modeling on fit-up, weld discontinuities, and defects. There will be a definite emphasis on proper welding techniques and procedures. Students will be advanced through tests performed and closely monitored by our welding staff. Students will develop skills using E-7018 in the 1F, 2F, 3F, and 4F, positions along with, performance tests to ASME Section IX code using E-7018 in the 1G, 2G, 3G, and 4G, positions. Additional blue-print reading skills will be integrated and emphasized. Safety standards are done in compliance with ANSI Z49.1 Safety in Welding, Cutting and Allied Processes.

Subject: WLD
Type: course
Edition: 2026
Source: imbc.edu
Prerequisite: WLD005

WLD 102SMAW Advanced Procedures

4 Quarter Credits Course Description: Students will be introduced to various electrodes such as E-6011, in the 1F, 2F, 3F, 4F, positions, E- 6010, in the 1F, 2F, 3F, 4F, positions, E-7014, in the 1F, 2F, 3F, 4F, positions, E-7024, in the 1F, and 2F, positions, E-LH- D80, will also be covered in the 3G down position. Proper power source settings will be discussed in depth also. Students will learn how to use electrode diameters ranging from 3/32 to 3/16. Students will be advanced through visual testing under the close supervision of the instructors both in the classroom and the lab. Additional blue-print reading skills will be integrated and emphasized. Safety standards are done in compliance with ANSI Z49.1 Safety in Welding, Cutting and Allied Processes.

Subject: WLD
Type: course
Edition: 2026
Source: imbc.edu
Prerequisite: WLD100 and WLD101

WLD 103Certified SMAW

4 Quarter Credits Course Description: During this term students will begin work- ing on their AWS D1: 1 plates. They will learn about the AWS D1:1 code and how it applies to various welded structures then progress to working on passing their D1:1 3G and 4G test plates. Additional blue-print reading skills will be integrated and emphasized along with an introduction to welding metalurgy and the weldability of various metals. Safety standards are done in compliance with ANSI Z49.1 Safety in Welding, Cutting and Allied Processes.

Subject: WLD
Type: course
Edition: 2026
Source: imbc.edu
Prerequisite: WLD100 and WLD101

WLD 110GMAW Fundamentals and Safety

4 Quarter Credits Course Description: Students will be taught proper safety and operation of the Gas Metal Arc Welding process. Students will learn how to properly setup a GMAW machine to make welds in the 1F, 2F, 3F, 4F, 1G, 2G, 3G, and 4G, using the short circuit transfer method. Welds in the 1F, 2F, and 1G positions will also be made using the axial spray transfer mode.

Subject: WLD
Type: course
Edition: 2026
Source: imbc.edu
Prerequisite: WLD005

WLD 111GMAW Methods and Practices

4 Quarter Credits Course Description: Students will learn advanced Gas Metal Arc Welding techniques, covering .045 short circuit, .035 pulsed on steel and .035 axial spray on aluminum. Pulse on pulse on aluminum, plus stainless steel will also be covered. An introduction to automation and robotics theory will be discussed along with several other welding processes.

Subject: WLD
Type: course
Edition: 2026
Source: imbc.edu
Prerequisite: WLD005

WLD 112FCAW Fundamentals and Safety

4 Quarter Credits Course Description: Students will learn proper safety and operation of the flux cored arc welding process through class- room instruction and practical lab application. Students will develop proper technique in the application of 1F, 2F, and 3F Innershield, Outershield, and Metalcore wires.

Subject: WLD
Type: course
Edition: 2026
Source: imbc.edu
Prerequisite: WLD005

WLD 113Certified FCAW

4 Quarter Credits Course Description: Students will continue to develop skills in the FCAW process through continued practice in the lab. Students after practice and preparation will take a certified D1.1 test. This course will also cover a variety of employers test process to better help employ the students.

Subject: WLD
Type: course
Edition: 2026
Source: imbc.edu
Prerequisite: WLD110 and WLD111

WLD 120GTAW Fundamentals and Safety

4 Quarter Credits Course Description: Students will be taught proper safety and operation of the Gas Tungsten Arc Welding process. Students will start their GTAW experience with precision welds applied to a padded plate in the flat position. Students will then progress to making welds in the 1F, 2F, 3F, and 4F, on first heavy plate and then progressing to thin plate as - weld puddle - control increases. Students will continue advancing their skills through the introduction of non-ferrous metals such as stainless steel and aluminum.

Subject: WLD
Type: course
Edition: 2026
Source: imbc.edu
Prerequisite: WLD005

WLD 121GTAW Methods and Practices

4 Quarter Credits Course Description: Students will be able to demonstrate the ability to produce ASME Section IX code welds in the follow- ing positions: 1G, 2G, 3G, and 4G in plate and 5G and 6G in pipe. Students will learn the importance of back shielding for both plate and pipe and how to make multi-pass welds to complete a weld joint.

Subject: WLD
Type: course
Edition: 2026
Source: imbc.edu
Prerequisite: WLD005

WLD 200Welding Review

4 Quarter Credits Course Description: During this review course the students will reinforce welding skills and practices previously covered in all welding courses. The students will demonstrate various types of welding procedures to enhance their skills in the areas of Oxy Fuel, Gas Metal Arc, Flux Core, Tungston Arc and Shielded Metal Arc Welding.

Subject: WLD
Type: course
Edition: 2026
Source: imbc.edu

Source: Institute of Medical Careers's catalog, linked per course · table learning_unit · CourseShelf publish 59