26 courses with the subject MMEL, each shown exactly as we captured it from the college's catalog, with every element we hold. Where the wording looks broken, that is our reading of the catalog, not the college's text.
Industrial Math concentrates on math skills needed for the mechanical trades. The course is a self-paced combination of internet and text material study through the Study Center located at the Regional Center for Advanced Manufacturing (RCAM) on the Kingsport site of Northeast State.
Piping and Piping Auxiliaries deals specifically with fasteners, diagrams, piping, and piping auxiliaries. This course is a self-paced combination of internet study, CD-ROM, and text material accompanied with scheduled instructor laboratory time at the Regional Center for Advanced Manufacturing (RCAM) on the Kingsport site of Northeast State.
Industrial Electricity is an introductory course to basic electrical principles including (a) DC circuits, (b) AC circuits, (c) wiring and conductors, and (d) motors and motor controls. This course is a self-paced combination of internet study accompanied with scheduled instructor laboratory time at the Regional Center for Advanced Manufacturing (RCAM) on the Kingsport site of Northeast State.
Basic Industrial Electricity and Alternating Current is an introductory course to basic electrical principles including (a) DC circuits, (b) AC circuits, (c) Transformers, single-phase and three-phase distribution (d) capacitors, and induction motors. This course is a self-paced text study accompanied with scheduled instructor laboratory time at the Regional Center for Advanced Manufacturing (RCAM) on the Kingsport site of Northeast State.
Basic Electrical Control Systems, Standards, Drawings, and Installation course concerns (a) electrical standards, (b) an introduction to the design and understanding of electrical schematics, and (c) Introduces conduit bending and installation. This course is a self-paced text study with scheduled instructor laboratory time at the Regional Center for Advanced Manufacturing (RCAM) on the Kingsport site of Northeast State.
Introduction to Electrical Equipment concentrates on the selection and safe use of applicable electrical test instruments. This course is a self-paced combination of internet study, CD-ROM, and text material accompanied with scheduled instructor laboratory time at the Regional Center for Advanced Manufacturing (RCAM) on the Kingsport Site of Northeast State.
Machine Reliability, Lubrication, and Basic Metallurgy concentrates on machine reliability, preventative maintenance, lubrication principles, and basic metallurgy. This course is a self-paced combination of internet study, CD-ROM, and text material accompanied with scheduled instructor laboratory time at the Regional Center for Advanced Manufacturing (RCAM) on the Kingsport site of Northeast State.
Basic Mechanics and Rigging is a study of: (a) force and motion, (b) fluid mechanics, (c) simple machines, and (d) basic rigging and lifting principles. This course is a self-paced combination of CD-ROM and text material delivered in the Study Center accompanied with scheduled instructor laboratory time at the Regional Center for Advanced Manufacturing (RCAM) on the Kingsport site of Northeast State.
Instrumentation and Control Fundamentals introduces the student to: (a) the concepts and devices associated with the sensing, measuring, and control of the basic process parameters of flow, pressure, level, and temperature; (b) the use of test instruments and devices to calibrate process instrumentation; and (c) the actual construction of basic instrument control loops on process simulators in a laboratory environment. This course is a self-paced combination of internet study, CD-ROM, and text material accompanied with scheduled instructor laboratory time at the Regional Center for Advanced Manufacturing (RCAM) on the Kingsport site of Northeast State.
The Mechanical and Electrical Control Systems course concerns (a) electrical standards, (b) introduction to the design and understanding of electrical schematics, and (c) transformers and three-phase electrical fundamentals. This course is a self-paced combination of internet study, CD-ROM, and text material accompanied with scheduled instructor laboratory time at the Regional Center for Advanced Manufacturing (RCAM) on the Kingsport site of Northeast State.
The Mechanical Print Reading and Precision Measurement course concerns the principles and procedures involved in reading and interpreting blueprints as well as to familiarize the student with precision measuring tools and their correct use. This course is a self-paced combination of internet study accompanied with scheduled instructor laboratory time at the Regional Center for Advanced Manufacturing (RCAM) on the Kingsport site of Northeast State.
The Gaskets, Packing, and Valves course focuses on shutoff and safety type valves along with their gaskets and packing. Also included are modules on hoses, tubing and steam traps. This course is a self-paced combination of Internet study, CD-ROM and text material accompanied with scheduled instructor laboratory time.
Instrumentation and Control is an in-depth study of piping and instrument drawings, interpretation of process control drawings, and in-depth study of the measurement and control of the following process parameters: pressure, liquid, fluid flow, temperature, and the application of control valves. This course is a self-paced internet study accompanied with scheduled instructor laboratory time at the Regional Center for Advanced Manufacturing (RCAM) on the Kingsport site of Northeast State.
Motors and Motor Controls is a study on the various designs of AC and DC motors as well as the identification, principles of operation, and the hooking up of motor controls used in the industry.
The Industrial Drives course focuses on the transmission of energy through mechanical couplings, belt and chain drives involving inspection, proper installation and alignment. The course is a self-paced Internet study with scheduled instructor laboratory time.
Hydraulics is a study of the basic principles of hydraulics. The student will gain hands on experience from the actual assembly and operation of various hydraulic components. Subjects covered are the theory, generation, storage, and usage of hydraulic energy.
Welding Fundamentals introduces the student to a Virtual 360 welding machine, shielded metal arc welding (SMAW), gas tungsten arc welding (GTAW), and thermal cutting processes. This course is a self-paced study using text material accompanied with scheduled instructor laboratory time at the Regional Center for Advanced Manufacturing (RCAM) on the Kingsport site of Northeast State. This training DOES NOT certify the student to weld on piping, vessels, or structural components.
The Alignment, Bearings and Oil Seals course focuses on the alignment of shifting relative to a driver and driven element using historic reverse dial initially and culminating with laser alignment. Bearings and seals are focused on relative to their effect on the alignment process. The course is a self-paced combination of Internet study, CD-ROM and text material accompanied with scheduled instructor laboratory time.
The Gears and Pneumatics course focuses on three major areas of mechanical training: gears, non-metallic materials, and pneumatics. The course is a self-paced combination of Internet study, CD-ROM and text material accompanied with scheduled instructor laboratory time.
The Mechanical Seals and Centrifugal Pumps course is an in-depth study of mechanical seals, centrifugal pumps and compressors. The course is a self-paced combination of Internet study, CD-ROM and text material accompanied with scheduled instructor laboratory time.
Piping & Piping Auxiliaries II is a study of Welded Piping Systems, Site Preparation for Equipment Installation, Distillation Columns and Heat Exchanger Repair. The course is enhanced using Multimedia (text, video, and handbooks), available in the study center, accompanied with scheduled instructor laboratory time at the Regional Center for Advanced Manufacturing (RCAM) on the Kingsport campus of NeSCC.
DC Fundamentals is a basic direct current electrical course involving the study of measuring and test equipment, Ohm’s law, and series and parallel type circuits. This course is a self-paced Internet study accompanied with scheduled instructor laboratory time.
The AC Fundamentals course is a comprehensive study of alternating current, its concepts, principles and use in today’s environment. The course is designed to teach the student skills necessary to analyze, test, and troubleshoot resistance, capacitance, inductance, and transformers in AC electronic circuits. This course is a self-paced Internet study accompanied with scheduled instructor laboratory time.
AC Fundamentals and Distribution Equipment is a comprehensive study of alternating current, its concepts, principles and use in today’s environment. The course is designed to teach the student skills necessary to analyze, test, and troubleshoot resistance, capacitance, inductance, and transformers in AC electronic circuits, three-phase electrical fundamentals, transformers, and distribution equipment. This course is a self-paced text study accompanied with scheduled instructor laboratory time at the Regional Center for Advanced Manufacturing (RCAM) on the Kingsport site of Northeast State.
Process Control & Operations is a study in the Process Control related to Batch type, as well as Continuous processes. The study also includes Distillation Columns, Heat Exchangers, and Circuit Breakers.
Analog and Digital Circuits and Instruments is a study in the most common electronic Analog and Digital circuits used in the industry today. Most used protocols such as HART and FOUNDATION FIELDBUS are explored and used for lab hook-ups. Also included is a section on troubleshooting of both electronic devices as well as Electronic Instrumentation.
Source: Northeast State Community College's catalog, linked per course · table learning_unit · CourseShelf publish 59
