Minneapolis Community and Technical College · Courses

WELD

19 courses with the subject WELD, each shown exactly as we captured it from the college's catalog, with every element we hold. Where the wording looks broken, that is our reading of the catalog, not the college's text.

WELD 1000Applied Shop Mathematics and Measuring Devices3.00

Subject: WELD
Credits (min): 3
Credits (max): 3
Type: course
Edition: 2013-2014
Source: minneapolis.edu

WELD 1000Applied Shop Mathematics and Measuring Devices

Subject: WELD
Type: course
Edition: 0010
Source: minneapolis.edu

WELD 1050Oxy/Acetylene Welding, Brazing

and Cutting 2.00 credits (1.00 lec/1.00 lab) This course teaches the proper utilization of Oxy/ Acetylene equipment and introduces you to brazing and cutting with compressed gasses. You will learn equipment safety and safe welding practices. Plasma arc cutting safety and applications will also be covered. Must be Taken A–F. into ESOL 0052 or completion of READ 0100 or ESOL 0042 with faculty recommendation into ESOL 0052.

Subject: WELD
Type: course
Edition: 2013-2014
Source: minneapolis.edu
Prerequisite: Placement into READ 0200 or placement
Corequisite: WELD 1100.

WELD 1100Shielded Metal Arc Welding4.00

(1.00 lec/3.00 lab) This course introduces electric arc welding with a flux- coated electrode. You will weld in all positions with various types of electrodes. Arc welding safety, power- sources and electrode selection are also covered. Must be taken A–F. of MATH 0060.

Subject: WELD
Credits (min): 4
Credits (max): 4
Credit unit: credits
Type: course
Edition: 2013-2014
Source: minneapolis.edu
Prerequisite: Placement into MATH 0070 or completion
Corequisite: WELD 1050.

WELD 1150Blueprint Reading and Welding Symbols3.00

General Education Choose any course from MnTC Goal Area 1 3.00 TOTAL CREDITS: 15.00

Subject: WELD
Credits (min): 3
Credits (max): 3
Type: course
Edition: 2013-2014
Source: minneapolis.edu

WELD 1150Blueprint Reading and Welding Symbols

1501 Hennepin Avenue, Minneapolis, MN 55403 612-659-6000

Subject: WELD
Type: course
Edition: 0010
Source: minneapolis.edu

WELD 2000Layout (Volumes) and Fixtures2.00

(2.00 lab) This course enables you to develop skills needed in the layout and fabrication of metal projects, aiding yo in estimating material usage, piece part accuracy and production efficiency.

Subject: WELD
Credits (min): 2
Credits (max): 2
Credit unit: credits
Type: course
Edition: 2013-2014
Source: minneapolis.edu
Prerequisite: WELD 1000.

WELD 2050Gas Metal Arc Welding3.00

(1.00 lec/2.00 lab) This course covers the gas metal arc welding process known commonly as wirefeed or MIG welding. You will learn GMAW theory, power supplies and machine controls. Proper welding technique will also be covered as you utilize welding equipment to complete various projects. into ESOL 0052 or completion of READ 0100 or ESOL 0042 with faculty recommendation into ESOL 0052.

Subject: WELD
Credits (min): 3
Credits (max): 3
Credit unit: credits
Type: course
Edition: 2013-2014
Source: minneapolis.edu
Prerequisite: Placement into READ 0200 or placement
Corequisite: WELD 2100.

WELD 2100Flux Core Arc Welding2.00

(2.00 lab) This course covers the flux core arc welding (FCAW) process known commonly as wirefeed welding. You will learn FCAW theory, power supplies and machine controls. You will also implement proper welding techniques as you use welding equipment to complete various projects. of MATH 0060.

Subject: WELD
Credits (min): 2
Credits (max): 2
Credit unit: credits
Type: course
Edition: 2013-2014
Source: minneapolis.edu
Prerequisite: Placement into MATH 0070 or completion
Corequisite: WELD 2050.

WELD 2150Gas Tungsten Arc Welding—DC Applications3.00

Subject: WELD
Credits (min): 3
Credits (max): 3
Type: course
Edition: 2013-2014
Source: minneapolis.edu

WELD 2200Gas Tungsten Arc Welding—AC Applications2.00

Subject: WELD
Credits (min): 2
Credits (max): 2
Type: course
Edition: 2013-2014
Source: minneapolis.edu

WELD 2500Fabrication Shop/ Equipment3.00

TOTAL CREDITS: 15.00 312 2013–2014 Catalog | Minneapolis Community & Technical College

Subject: WELD
Credits (min): 3
Credits (max): 3
Type: course
Edition: 2013-2014
Source: minneapolis.edu

WELD 2600Pipe Welding3.00

(1.00 lec/2.00 lab) This course will introduce basic welding techniques on steel pile. You will prepare, fit-up and produce welds on pipe which are visually examined and destructively tested. Prior experience in arc welding theory and technique is required. Must be taken A–F.

Subject: WELD
Credits (min): 3
Credits (max): 3
Credit unit: credits
Type: course
Edition: 2013-2014
Source: minneapolis.edu
Prerequisite: WELD 1100.

WELD 2650Advanced GTAW3.00

(3.00 lab) In this course, you will perform gas tungsten arc welding on a variety of materials. You will utilize GTAW to fabricate projects to blueprint specification and perform root pass welds on pipe. Must be taken A–F.

Subject: WELD
Credits (min): 3
Credits (max): 3
Credit unit: credits
Type: course
Edition: 2013-2014
Source: minneapolis.edu
Prerequisite: WELD 1150, WELD 2150, WELD 2200.

WELD 2700Advanced Blueprint and Welding Symbols3.00

ARTS 2233 Sculpture: Direct Metals 3.00 General Education Choose a course from one of the following MnTC Goal 3.00 Areas: 7, 8, 9 or 10 TOTAL CREDITS: 15.00

Subject: WELD
Credits (min): 3
Credits (max): 3
Type: course
Edition: 2013-2014
Source: minneapolis.edu

WELD 2800Advanced GMAW3.00

(3.00 lab) In this course, you will perform gas metal arc welding on a variety of materials. You will use GMAW to fabricate projects to blueprint specifications. You will also learn about welding economics. Must be taken A–F.

Subject: WELD
Credits (min): 3
Credits (max): 3
Credit unit: credits
Type: course
Edition: 2013-2014
Source: minneapolis.edu
Prerequisite: WELD 1150, WELD 2050, WELD 2100.

WELD 2850Welder Qualification2.00

(2.00 lab) In this course, you will learn documentation related to qualification procedures to various codes and standards. You will also perform welder qualification testing. Must be taken A–F.

Subject: WELD
Credits (min): 2
Credits (max): 2
Credit unit: credits
Type: course
Edition: 2013-2014
Source: minneapolis.edu
Prerequisite: WELD 1000 or instructor approval.

WELD 2900Advanced Shop Fabrication/Equipment2.00

Subject: WELD
Credits (min): 2
Credits (max): 2
Type: course
Edition: 2013-2014
Source: minneapolis.edu

WELD 2950Inspection and Testing2.00

General Education Choose any 2 courses from any of the MnTC Goal Areas 6.00 TOTAL CREDITS: 15.00 General Education Courses (15 Credits) To complete the Welding and Manufacturing A.A.S. degree, students are required to successfully complete 15 credits of General Education coursework. This coursework must be selected from at least three of the MnTC Goal Areas. A minimum of three credits must be completed from MnTC Goal Area 1 and three credits from MnTC Goal Areas 7, 8, 9 or 10. ARTS 2233: Sculpture: Direct Metals is a required course and meets MnTC Goal Area 6. 313 2013–2014 Catalog | Minneapolis Community & Technical College

Subject: WELD
Credits (min): 2
Credits (max): 2
Type: course
Edition: 2013-2014
Source: minneapolis.edu

Source: Minneapolis Community and Technical College's catalog, linked per course · table learning_unit · CourseShelf publish 61