WELD 1501Introduction to Welding3
- Subject
- WELD
- Credits (min)
- 3
- Credits (max)
- 3
- Type
- course
- Edition
- 2025-2026
- Source
- pine.edu
Pine Technical & Community College · Courses
WELD
10 courses with the subject WELD, each shown exactly as we captured it from the college's catalog, with every element we hold. Where the wording looks broken, that is our reading of the catalog, not the college's text.
WELD 1558Print Reading for Welders2
in reading Corequisite: none This course will give students an understanding of basic mechanical drawing principles. Topics include the alphabet of lines, arrangement of views, orthographic projections, scaling, dimensioning, tolerancing, and symbols. Students will read and interpret mechanical drawings to develop the skills necessary to fabricate individual component parts. Written tests and Fundamental tests will be administered in accordance with the American Welding Society (AWS) and the appropriate correlating code books. Transfer Curriculum Goal(s): none
- Subject
- WELD
- Credits (min)
- 2
- Credits (max)
- 2
- Credit unit
- credits
- Type
- course
- Edition
- 2025-2026
- Source
- pine.edu
- Prerequisite
- Placement determined by a minimum entry assessment score
WELD 1560Interpreting Symbols2
This course examines the fundamental component of welding prints that make up structures in the welding industry. To accurately layout and fabricate parts, the welder will need basic knowledge of print lines, 141 ourse Listings & Descriptions
- Subject
- WELD
- Credits (min)
- 2
- Credits (max)
- 2
- Credit unit
- credits
- Type
- course
- Edition
- 2025-2026
- Source
- pine.edu
- Prerequisite
- none Corequisite: none
WELD 1562Oxyfuel Welding and Cutting Process2
This course covers the use of oxy-fuel equipment while welding, cutting, brazing, and using the Plasma Arc Cutting (PAC) and Air Carbon Arc Cutting (CAC-A) processes. There will also be an introduction into laser cutting equipment. A very important part of this course will be discussing safety as it relates to the thermal welding and cutting equipment. Time will be spent in the lab developing skills using the thermal welding and cutting processes. Welds will be made in the flat, horizontal, vertical, and overhead positions. Cuts will be made in the flat and horizontal positions. Written and Fundamental tests will be done in accordance with the American Welding Society (AWS) codes and standards. Transfer Curriculum Goal(s): none
- Subject
- WELD
- Credits (min)
- 2
- Credits (max)
- 2
- Credit unit
- credits
- Type
- course
- Edition
- 2025-2026
- Source
- pine.edu
- Prerequisite
- none Corequisite: none
WELD 1564Shielded Metal Arc Welding (SMAW)4
Students will study the safety concerns connected with the Shielded Metal Arc Welding (SMAW) process, along with an introduction into the types of power sources used for arc welding, process applications, electrode selections, overview of weld types, and other work-related safety conditions in the welding field. Time will be spent in the lab developing skills using the SMAW processes. Welds will be made in the flat, horizontal, vertical, and overhead positions. Written and Fundamental tests will be done in accordance with the American Welding Society (AWS) codes and standards. Transfer Curriculum Goal(s): none
- Subject
- WELD
- Credits (min)
- 4
- Credits (max)
- 4
- Credit unit
- credits
- Type
- course
- Edition
- 2025-2026
- Source
- pine.edu
- Prerequisite
- none Corequisite: none
WELD 1566Gas Metal Arc Welding (GMAW) / Flux Cored Arc Welding
(FCAW) (4 credits) Students will study the safety concerns connected with the Gas Metal Arc Welding (GMAW) and Flux Cored Arc Weld (FCAW). The GMAW process will be discussed in depth in relationship to the different type of modes of transfer available, shielding gases, and the different types of materials that can be welded. The FCAW process is similar in the type of equipment used for mode of transfer. The differences in the electrode types of gas-shielded wires and self-shielded wires will be discussed along with the types of shielding gases that are used. There will be discussions on the importance of 142
- Subject
- WELD
- Type
- course
- Edition
- 2025-2026
- Source
- pine.edu
- Prerequisite
- none Corequisite: none
WELD 1568Gas Tungsten Arc Welding (GTAW)4
This course covers the safety hazards and applications for Gas Tungsten Arc Welding (GTAW) in the welding industry. Material covered in the classroom will be power sources, setup, types of current, current selection, shielding gases and torch types. Various procedures will be discussed for welding different metals (Aluminum, Stainless Steel, and Mild Steel) and potential problems that may be encountered. Applications for the process in different
- Subject
- WELD
- Credits (min)
- 4
- Credits (max)
- 4
- Credit unit
- credits
- Type
- course
- Edition
- 2025-2026
- Source
- pine.edu
- Prerequisite
- none Corequisite: none
WELD 1570Metallurgy and Mechanical Properties of Materials1
This course covers the study of metals and how the effects of welding and heat treatments affect them. Terminology dealing with metallurgy will be an important part of the course. Physical and mechanical properties of ferrous and nonferrous metals will be covered along with the classifications of the different types of metals. By understanding the mechanical properties of metals, you will gain an understanding of the range of usefulness of the materials in the metal working community. Written tests will be done in accordance with the American Welding Society (AWS) codes and standards. Transfer Curriculum Goal(s): none
- Subject
- WELD
- Credits (min)
- 1
- Credits (max)
- 1
- Credit unit
- credit
- Type
- course
- Edition
- 2025-2026
- Source
- pine.edu
- Prerequisite
- none Corequisite: none
WELD 1580Welding Technologies Capstone Project3
This course presents students with a real-world manufacturing project, utilizing the knowledge and experience gained in previous welding, fabrication, and manufacturing courses. This involves designing a complete project including fixtures and a timeline for completion. Parts will be 143 urse Listings & Descriptions
- Subject
- WELD
- Credits (min)
- 3
- Credits (max)
- 3
- Credit unit
- credits
- Type
- course
- Edition
- 2025-2026
- Source
- pine.edu
- Prerequisite
- WELD 1566 GMAW/FCAW and CMAE 1514 Safety Awareness
- Corequisite
- none
WELD 1585Welding Internship3
This course is designed around a student attaining an internship in a business. The student internship may be paid or unpaid as agreed to between the student and the business. The student will demonstrate welding competencies as designed by the instructor and the business. A person from the business will monitor the student's work. The student will demonstrate professionalism and proper welding techniques to pass the course. The instructor will maintain bi-weekly contact with the business to discuss the student progress reviews. An internship plan will be developed for each student. Actual hours of on-the-job work experience will be outlined in the internship plan, but shall be no less than 120 hours in total. Transfer Curriculum Goal(s): none 144
- Subject
- WELD
- Credits (min)
- 3
- Credits (max)
- 3
- Credit unit
- credits
- Type
- course
- Edition
- 2025-2026
- Source
- pine.edu
- Prerequisite
- CMAE 1514 and WELD 1566 Corequisite: none
Source: Pine Technical & Community College's catalog, linked per course · table learning_unit · CourseShelf publish 61