21 courses with the subject CMT, each shown exactly as we captured it from the college's catalog, with every element we hold. Where the wording looks broken, that is our reading of the catalog, not the college's text.
CMT 1005Elements of Surveying3
Activities that will acquaint the student with instruments and tools of the surveyor, including their use in the techniques of field surveying. Emphasis on actual layouts and areas and elevations as performed in the civil and construction discipline.
Subject
CMT
Credits (min)
3
Credits (max)
3
Credit unit
Credit Hours
Type
course
Repeatable
Repeatability: This course may not be repeated for additional credits.
The application of computers for computer-aided drawings, graphical presentations, communications, data base operations and engineering computations, which require the writing of higher level language program segments to solve engineering application problems in statics and dynamics; with laboratory.
Subject
CMT
Credits (min)
3
Credits (max)
3
Credit unit
Credit Hours
Type
course
Repeatable
Repeatability: This course may be repeated for additional credit.Pre-requisites: Minimum grade of C- in PHYS 1021.
Materials and construction processes of importance to the designer and constructor; construction equipment and methods of handling and placing these materials on the job.
Subject
CMT
Credits (min)
3
Credits (max)
3
Credit unit
Credit Hours
Type
course
Repeatable
Repeatability: This course may not be repeated for additional credits.
CMT 2125Construction Contracts and Specifications3
Analysis of construction contract law cases, analysis of selected contracts, bidding and contract award procedures, interpretation of specifications. Preparation of written reports and oral presentations are required.
Subject
CMT
Credits (min)
3
Credits (max)
3
Credit unit
Credit Hours
Type
course
Repeatable
Repeatability: This course may not be repeated for additional credits.
A basic study of the primary mechanical and electrical equipment and systems used in buildings. Design principles for selecting and sizing various systems are stressed throughout the course. Mechanical topics include plumbing, heating, ventilating, air conditioning, water supply, fire protection, and sanitary sewer systems. Electrical topics include basic principles of electricity, single and three phase systems, transformers, branch circuits and feeders, and residential and commercial illumination.
Subject
CMT
Credits (min)
3
Credits (max)
3
Credit unit
Credit Hours
Type
course
Repeatable
Repeatability: This course may not be repeated for additional credits.Pre-requisites: Minimum grade of C- (except where noted) in (PHYS 1022, PHYS 1062, or PHYS 1962) and CMT 2124 (D- or higher)
Estimating quantities of materials, labor, and equipment for various construction tasks; pricing of cost items; indirect costs; types of bids and bidding process; term project using actual construction blueprints; written and oral presentations; computer applications using spreadsheet program and Timberline Precision Estimating Software.
Subject
CMT
Credits (min)
3
Credits (max)
3
Credit unit
Credit Hours
Type
course
Repeatable
Repeatability: This course may not be repeated for additional credits.Pre-requisites: Minimum grade of D- in (CMT 2124 and CMT 2125)
Introduction of the construction bidding process and construction documents; blueprint reading; programming and database generation with spreadsheet software; computer applications using Timberline Precision Estimating Software.
Subject
CMT
Credits (min)
1
Credits (max)
1
Credit unit
Credit Hour
Type
course
Repeatable
Repeatability: This course may not be repeated for additional credits.Pre-requisites: Minimum grade of D- in (CMT 2124 and CMT 2125)
The analysis of statically determinant structures under static and moving loads, techniques for determining the deflection of structural members, and analysis of indeterminate structures.
Subject
CMT
Credits (min)
3
Credits (max)
3
Credit unit
Credit Hours
Type
course
Repeatable
Repeatability: This course may not be repeated for additional credits.Pre-requisites: Minimum grade of D- in (ENGT 2322 or ENGR 2333)
Field office planning, quality control plan development, construction planning and scheduling; term project using actual construction blueprints; written and oral presentations; computer applications using Primavera Project Planner Software.
Subject
CMT
Credits (min)
3
Credits (max)
3
Credit unit
Credit Hours
Type
course
Repeatable
Repeatability: This course may not be repeated for additional credits.Pre-requisites: Minimum grade of D- in (CMT 2124 and CMT 2125)
CMT 3341Environmental and Safety Aspects of Construction2
Construction-related environmental issues, erosion control, wetland areas, habitat protection. Issues which relate to protective equipment, safety and potential hazards for construction workers, construction equipment operators, and others impacted by on-going construction activities; with laboratory.
The design of water conveying and containment systems; pumps, sewers, open channels, dams, reservoirs, and water-related structures.
Subject
CMT
Credits (min)
3
Credits (max)
3
Credit unit
Credit Hours
Type
course
Repeatable
Repeatability: This course may not be repeated for additional credits.Pre-requisites: Minimum grade of C- (except where noted) in (ENGT 2331 or ENGR 2331 (D- or higher))
A course designed to present new and emerging areas of Construction Management Technology. The course may also be used to present areas not normally taught in the College. Course requirements vary with the topic and instructor. Offered as needed or as appropriate.
Subject
CMT
Credits (min)
1
Credits (max)
4
Credit unit
Credit Hour
Type
course
Repeatable
Repeatability: This course may be repeated for additional credit.
CMT 4182Independent Study in Construction Management Technology2-5
Student may complete a regular course during a semester the course is not offered, to meet prerequisite or graduation requirements. An instructor is assigned to supervise the student.
Subject
CMT
Credits (min)
2
Credits (max)
5
Credit unit
Credit Hours
Type
course
Repeatable
Repeatability: This course may be repeated for additional credit.
CMT 4183Directed Study in Construction Management Technology1-4
An opportunity to study specialized topics not covered in currently available courses and providing significant progress towards the technical/professional objectives of the program. An instructor is assigned to define the scope, direct, supervise, and evaluate student progress.
Subject
CMT
Credits (min)
1
Credits (max)
4
Credit unit
Credit Hour
Type
course
Repeatable
Repeatability: This course may be repeated for additional credit.
Structural systems and framing plans are developed for simple wood and steel structures. Typical framing members are designed and analyzed for adequate strength and serviceability.
Subject
CMT
Credits (min)
3
Credits (max)
3
Credit unit
Credit Hours
Type
course
Repeatable
Repeatability: This course may not be repeated for additional credits.Pre-requisites: Minimum grade of D- in CMT 3145.
Structural systems and framing plans are developed for simple concrete and masonry structures. Typical sub-systems and framing members are designed and analyzed for adequate strength and serviceability. The design of plain and reinforced concrete footings is included.
Subject
CMT
Credits (min)
3
Credits (max)
3
Credit unit
Credit Hours
Type
course
Repeatable
Repeatability: This course may not be repeated for additional credits.Pre-requisites: Minimum grade of D- in CMT 3145.
Transportation systems of the United States; design and technology of signalized traffic intersections, coordinated for the design of flexible and rigid pavements.
Subject
CMT
Credits (min)
3
Credits (max)
3
Credit unit
Credit Hours
Type
course
Repeatable
Repeatability: This course may not be repeated for additional credits.
Construction cost accounting systems, job costing approaches, project budgeting, financial reporting procedure. Term project; written and oral presentations. Computers applied as required.
Subject
CMT
Credits (min)
3
Credits (max)
3
Credit unit
Credit Hours
Type
course
Repeatable
Repeatability: This course may not be repeated for additional credits.Pre-requisites: Minimum grade of D- in (CMT 3121 and CMT 3322)
Synthesis of estimating, scheduling, and cost control for selected construction projects. Project management computer application. Preparation of written reports and oral presentations is required.
