EGR

Selective Technical electives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Subject

EGR

Credits (min)

4

Credits (max)

4

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

EGR3326. A maximum combined 4 credits allowed from EGR4841

Subject

EGR

Credits (min)

3

Credits (max)

3

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: C- or better in PHY1202 and successfully passed or concurrently enrolled in EGR2108) Introduction to modeling, analysis, and design of linear circuits using lumped models for various sources and passive elements. Topics include the application of Ohm’s and Kirchhoff’s laws, transient and steady state analyses of reactive circuits, and use of ideal diode, BJT, FET, and operational amplifier models in the design of practical applications. A $200 course fee required.

Subject

EGR

Credits (min)

3

Credits (max)

3

Credit unit

cr

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: C- or better in PHY1202 and successfully passed or concurrently enrolled in EGR2107) Laboratory experiences spanning the use of standard electrical test and measurement equipment in the design of various first and second order linear circuits. Student team members support one another on documentation of findings. A $200 course fee required. r education program. 2 cr . . . 2 cr . . . . 4 cr . . . . . . . . . . University of Northwestern – St. Paul Undergraduate Catalog 2026-2027

Subject

EGR

Credits (min)

2

Credits (max)

2

Credit unit

cr

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: C- or better in EGR1005) Application of manufacturing processes with consideration of manufacturability at the design phase and realization of the design through safe operation of basic machining equipment. A $200 course fee required.

Subject

EGR

Credits (min)

2

Credits (max)

2

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

Technical Electives. . . . . . . . . . . . . . . . . . . . . Select from EGR-prefix courses at the 3000 or 4000 level. Students . 4 may not receive credit toward the major for both EGR3246 and EGR3326. A maximum combined 4 credits allowed from EGR4841 and EGR4995. WCE = WRITTEN COMMUNICATION EMPHASIS. OCE = ORAL COMMUNICATION EMPHASIS. SEE PAGE 49 FOR EXPLANATION AND PREREQUISITES. d Selectives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BIO, CHE, HPE, KIN, or PHY prefix courses, or other courses approved by the School of Science and Engineering. BIO and CHE courses numbers must be higher than 1009. Work experience as a Certified Nursing Assistant is highly recommended. WCE = WRITTEN COMMUNICATION EMPHASIS OCE = ORAL COMMUNICATION EMPHASIS. SEE PAGE 49 FOR EXPLANATION AND PREREQUISITES. . . . . . . . . . . . . . . . . . . . . . . . 17 . . . 9 cr

Subject

EGR

Credits (min)

2

Credits (max)

2

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: C- or better in EGR2105) Basic classical concepts of structural analysis, including external reactions, internal forces and deformations of two- and three-dimensional statically determinate and indeterminate structures. A $200 course fee required.

Subject

EGR

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

Select from EGR-prefix courses at the 3000 or 4000 level. Students

Subject

EGR

Credits (min)

4

Credits (max)

4

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

may not receive credit toward the major for both EGR3246 and

Subject

EGR

Credits (min)

3

Credits (max)

3

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

and EGR4995.

Subject

EGR

Credits (min)

3

Credits (max)

3

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

EGR4311 Engineering Design I [WCE]. . . . . . . . . . . . . . . . . . . . . . 3 may not receive credit toward the major for both EGR3246 and EGR4312 Engineering Design II [OCE]. . . . . . . . . . . . . . . . . . . . . . 3 EGR3326. A maximum combined 4 credits allowed from EGR4841 and EGR4995. Civil Engineering Concentration

Subject

EGR

Credits (min)

30

Credits (max)

30

Credit unit

cr

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: EGR2205) Design, analysis, and selection of machine components for static and fluctuating loading are used for the application of design fundamentals to mechanical components and the integration of components to form a system. Open-ended design projects are used to reinforce the design process. A $200 course fee required.

Subject

EGR

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

Select one of the following:

Subject

EGR

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: EGR2105; C or better in EGR2207; and MAT3335 or concurrently enrolled) Introduction and fundamentals of fluid properties, fluid statics, control volume and differential analysis for continuity, momentum and energy equations. Bernoulli equation and potential flow. Laminar and turbulent internal and external flows. Dimensional analysis and similitude. Boundary layers, lift and drag. A $200 course fee required.

Subject

EGR

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: EGR2107) The construction and operation of various semiconductor devices are described and presented in common applications. Small signal analysis is used to determine the input resistance, output resistance, amplification, and frequency response of single and multi-stage amplifiers. The properties of A, B, and AB power amplifiers are explored. Operational amplifiers are presented in the design of instrumentation, active filter, and oscillator systems. Simulation is utilized to reinforce concepts. A $200 course fee required.

Subject

EGR

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: MAT3226 or concurrently enrolled) The fundamentals of digital systems are introduced and applied in a laboratory setting. Topics include the use of a hardware descriptive language for the design of combinational and sequential logic circuits. Various programmable devices, including programmable logic devices (PLD), field-programmable gate arrays (FGPA), and microcontroller implementations are investigated. Learned skills culminate in a design project. A $200 course fee required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . University of Northwestern – St. Paul Undergraduate Catalog 2026-2027 . . . . . . . . 3 cr EGR3237 Electromagnetic Fields and Waves Laboratory . . . . . . . . 2 cr (PQ: EGR2107) Properties of transmission lines, electrostatics, magnetostatics, and electromagnetic waves in unbounded space are modeled by Maxell’s equations and illustrated in a laboratory setting. Topics include wave guides, cavities, radiation theory, and antennas. A $200 course fee required.

Subject

EGR

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

. . . . . . . . . . . . . 3 cr (PQ: EGR2105) Topics include design loads per structural and building codes; Support reactions; Structural stability and determinacy; Determinate structure including trusses, beam and frame, cable and arch; Deflections of beams and frames; Work-Energy Methods for deflection calculation; indeterminate structures: Force Method, Displacement Method, and Moment Distribution Method. A $200 course fee required. . . . . . . . . .

Subject

EGR

Credits (min)

3

Credits (max)

3

Credit unit

cr

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: EGR2205) Behavior mechanisms for materials such as concrete, metals, plastics, wood and asphalt. Specification standards for material properties. Testing techniques for materials. A $200 course fee required.

Subject

EGR

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: EGR2207, MAT3223) This course delves into the principles of . . . . . . . . . 3 cr solution thermodynamics, emphasizing vapor-liquid phase equilibria for both ideal and non-ideal solutions. Key topics include the definitions and applications of fugacity, activity, and activity coefficients. Students explore equations of state to calculate mixture properties and study various activity coefficient models, including van Laar, Wilson, and NRTL. The course also covers Gibbs free energy changes associated with mixing and phase transitions, as well as chemical reaction . . . . . . . . . . 3 cr equilibria. Additionally, students conduct thermodynamic analyses of processes involving phase equilibria, such as distillation and multi- component flash calculations. A $200 course fee required.

Subject

EGR

Credits (min)

3

Credits (max)

3

Credit unit

cr

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: CHE3101, EGR3307) This course covers chemical reaction kinetics and the principles of reactor design, essential for optimizing chemical processes. Students explore the fundamental concepts of reaction rates, mechanisms, and the factors that influence kinetics, . . . . . . . . . . 3 cr including temperature, concentration, and catalysts. The course covers both batch and continuous reactor designs including plug flow reactors, continuous stirred-tank reactors, and catalytic reactors. Case studies and practical examples illustrate the importance of reactor design in achieving desired conversion, selectivity, and yield in industrial applications. A $200 course fee required.

Subject

EGR

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: EGR2205) Testing of mechanical properties of engineering . . . . . . . . . 4 cr materials (modulus of elasticity, tensile strength, strength in compression, impact strength, creep, necking, fracture). A $200 course fee required.

Subject

EGR

Credits (min)

2

Credits (max)

2

Credit unit

cr

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: EGR3225 and MAT3335) Fundamental principles of steady and unsteady heat transfer by conduction, radiation, and convection are examined. Contains design of fins, phase change heat transfer, and heat exchanger design. Finite difference techniques are developed and examined. A $200 course fee required. . .

Subject

EGR

Credits (min)

2

Credits (max)

2

Credit unit

cr

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

Technical Electives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Select from EGR-prefix courses at the 3000 or 4000 level. Students may not receive credit toward the major for both EGR3246 and EGR3326. A maximum combined 4 credits allowed from EGR4841 and EGR4995.

Subject

EGR

Credits (min)

2

Credits (max)

2

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: EGR3236) Microcontroller organization, opcodes, assembly language programming, logic operations, and bit manipulation with C language equivalency are introduced in a laboratory setting. Peripheral interface, PWM output, and interrupt programming are implemented for typical solutions. A $200 course fee is required.

Subject

EGR

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: MAT3335) An introduction to time and frequency domain representation of fundamental, continuous and discrete time signals and systems. Topics include fundamental signals and operations, system properties, and representation of linear time-invariant systems with application of appropriate Fourier and Laplace analysis. MATLAB is used to simulate, implement, and analyze the effects of various FIR and IIR filters. A $200 course fee required.

Subject

EGR

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: EGR2108) The fundamentals of analog and digital communication systems are introduced in a laboratory setting. Various modulation and demodulation methods are explored by practically transmitting and receiving signals, respectively. Signal to noise ratio, quantization error, and other parameters are evaluated in order to discuss system performance. A $200 course fee required.

Subject

EGR

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: EGR3246) Concepts include geological origin of soil; Grain size of soil; Weight-volume relationships; Plasticity and structure of soil; Classification of soils; Soil compaction; Permeability and Seepage; Stresses in soil; Compressibility of soil; Shear strength of soil; Lateral earth pressure; Slope stability; Bearing capacity of soil; Shallow foundations; Subsoil exploration. A $200 course fee required.

Subject

EGR

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: EGR3246, and EGR3347 or concurrently enrolled) Students investigate testing techniques for geotechnical engineering materials which includes specification standards for soils testing, behavior mechanisms for soils, and determination of moisture content, specific gravity, and Atterberg limits of soils. Sieve analysis, hydrometer analysis, soil classification, proctor compaction test, permeability of soils, shear strength of soil, consolidation testing of soil, and triaxial testing of soil are also explored. A $200 course fee required.

Subject

EGR

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: EGR3335) The specification, design, development, simulation, and testing of real-time, embedded microcontroller systems are discussed and practically implemented. Various architectures, real- time programming, and interface of common peripheral devices are introduced and used in applications. A programmable logic controller (PLC) device is introduced and used in typical industrial applications. A $200 course fee required.

Subject

EGR

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: EGR2107) The fundamentals of transformers and rotating machines are analyzed with typical industrial applications. Power system generation, transmission, and distribution are modeled using equivalent three-phase and single-phase circuits in order to assess stability and dynamic performance. Power flow is simulated with consideration of faults and protection. A $200 course fee required.

Subject

EGR

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: EGR2105) Properties of concrete-making materials; Proportioning of concrete mixtures; Design loads; Behavior of plain and reinforced concrete subjected to flexural and compressive stresses; Strength reduction factor for concrete structures; Failure theories, nominal and design strength of plain and reinforced concrete structural components; Bond, development lengths and splices; Design of beams, slabs, columns and continuous components of reinforced concrete; Design of reinforced concrete structures including footings, retaining walls and shear walls; Design for shear, torsion and serviceability of reinforced concrete. A $200 course fee required. . . . . . . . . . . . . . . . . . . . . 2 cr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . University of Northwestern – St. Paul Undergraduate Catalog 2026-2027 . . 2 cr EGR4247 Transportation Engineering. . . . . . . . . . . . . . . . . . . (PQ: MAT2122) Introduction to the profession of transportation engineering; transportation systems and organizations; principles of traffic operations including characteristics of drivers, pedestrians, vehicles and roads, highway safety, theories of traffic flow, intersection design and control, and highway capacity and intersection capacity; process of transportation planning including forecasting travel demand . . . . . . . 3 cr and evaluation of transportation alternatives; design of highway infrastructure including geometrical design of highway facilities and design of highway drainage; pavement materials and pavement design including soil engineering, bituminous materials, and design of flexible and rigid pavements; pavement management. A $200 course fee required.

Subject

EGR

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: minimum of 34 EGR-prefix credits or consent of instructor.) The practice and responsibilities of a professional engineer are presented and discussed in various ethical, legal, and business contexts. The process and maintenance requirements for state licensure and membership in the National Society of Professional Engineers are reviewed. Preparation for the Fundamentals of Engineering exam is implemented in order to initiate the licensure process. A $200 course fee required. . . . . 3 cr EGR4311 Engineering Design I WCE. . . . . . . . . . . . . . . . . . . . (PQ: ENG1107 and 30 credits from EGR-prefix courses; COS3001, MAT3326, and SCI1010 may be included in the 30 credits) Systematic project design with consideration of client need and specification is implemented by a student team. In particular, the team researches and proposes a solution with analysis of components, materials, man- power, cost estimate, and possible health, safety, environmental, ethical, and social impact. An approved project is then scheduled to . . . . . 2 cr identify and define major activities in each project phase, minimize resource conflicts, describe team member responsibilities, and ensure cost effective budgeting, control, and reporting in order to audit, assess, and mitigate project risk. A $200 course fee required.

Subject

EGR

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

OCE = ORAL COMMUNICATION EMPHASIS.

Subject

EGR

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: EGR4311; and COM1075 or COM1825) Based upon Engineering Design I, a student team implements an established project plan and evaluates the solution with consideration of the design criteria and impact on health, safety and environment. Assessment is based . . . 3 cr on member ability to support team success in project organization, documentation, presentation and achievement. A $200 course fee required.

Subject

EGR

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: EGR2206, EGR2205 or EGR3225, MAT3335; C- or better in all prerequisites) Geometric and solid modeling for computational analysis, system optimization and rapid prototyping. Focus is on designing a system, representing that system on the computer using 3 cr appropriate meshing techniques, and analyzing it using finite volume or finite element techniques. Emphasis is on the use of computer-based tools for system design. Students are required to develop models that capture the necessary physics, are computationally efficient, and are validated where possible. A $200 course fee required.

Subject

EGR

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: EGR3327) his course explores the design and analysis of systems 3 cr in which thermal and fluid processes are central to their function and performance. Topics such as nonreacting and reacting gas mixtures, psychrometrics, refrigeration cycles, HVAC, and heat exchanger design are covered. A $200 course fee required.

Subject

EGR

Credits (min)

3

Credits (max)

3

Credit unit

cr

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: MAT3335) Numerical analysis algorithms are introduced with a focused application to biomedical systems. Specifically, computer- based methods are used to model and simulate linear and nonlinear, static and dynamic, biological systems with consideration of error. A $200 course fee required. . . . . . . . 3 cr . . . 2 cr . . . . . . . . . 3 cr . . . . . . . . . 3 cr . . 3 cr . . . . . . . . . . . .

Subject

EGR

Credits (min)

3

Credits (max)

3

Credit unit

cr

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: EGR2107) The fundamental devices, circuitry, and techniques used to acquire and process biomedical quantities and signals are discussed, analyzed, and practically implemented in a laboratory setting. In particular, physiological signals, related transducers, signal conditioning methods, and extracted features are used in the design of biomedical acquisition systems. Furthermore, the safe design of biomedical devices, clinical laboratory instruments, and medical imaging systems is discussed and analyzed. A $200 course fee required.

Subject

EGR

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: EGR2205 and MAT3335) This course introduces the complex mechanical behaviors of biological tissues and human movement. It is intended to provide a sound basis for students interested in pursuing careers in biotechnology, medicine, or biomedical research. The course includes anisotropy, viscoelasticity, active force generation and pressure vessels as applied concepts of statics, dynamics, and mechanics of materials to biological systems. Changes in mechanics due to injury or disease are also discussed. Relevant aspects of anatomy and physiology are covered as appropriate. A $200 course fee required.

Subject

EGR

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: EGR2125, EGR3115) An introduction to industrial prototyping using advanced computer aided design (SolidWorks) topics and machining techniques. Skills necessary to take a product idea from an initial concept through design, development and production are introduced and implemented through team-based projects with industrial applications. A $200 course fee required.

Subject

EGR

Credits (min)

3

Credits (max)

3

Credit unit

cr

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: consent of instructor) Students identify a problem, conduct 3 cr a literature search, write a proposal outlining the research to be conducted and then carry out the research project. Students prepare a written report and/or an oral summary of their work. Note: This course is designated as repeatable for a maximum of 4 credits. A $200 course fee required.

Subject

EGR

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu

(PQ: junior standing, consent of instructor, and internship registration form) Students gain industry experience through an internship position that provides an opportunity for the application of problem-solving skills with consideration of engineering ethics and practice. Note: This course is designated as repeatable for a maximum of 4 credits. See page 26 for note regarding internships.

Subject

EGR

Type

course

Edition

2026-2027-undergraduate

Source

www.unwsp.edu