19 courses with the subject AUTO, each shown exactly as we captured it from the college's catalog, with every element we hold. Where the wording looks broken, that is our reading of the catalog, not the college's text.
AUTO 1500Basic Automotive Mechanics4
This course focuses on the different automotive systems, how they function, and how the individual components of the system operate independently and as a complete system. The student will learn to apply correct technical terminology for the components vs. vernacular terminology. The student will learn the basic assembly and disassembly of certain repairable parts within an automotive system that will increase their working knowledge of the system or components. (2 lect., 4 lab)
AUTO 1504Automotive Safety & Pollution Prevention0.5
This entry-level course is designed to satisfy Occupational Safety and Health Administration (OSHA) and Environmental Protection Agency (EPA) requirements for newly-hired employees in the automotive service sector. Upon successful completion of the course, students will be issued an S/P2 (Safety & Pollution Prevention) certificate that is nationally recognized as the industry standard for environmental and safety awareness training. (.5 lect.)
This is an introductory course emphasizing the operational principles of basic engine systems and overhaul of the automotive engine. Emphasis is placed on proper use of precision measuring instruments and rebuilding tools, ability to locate and interpret engine specifications, engine diagnosis, and correct repair procedures. The student will learn written communication with service writers and customers through proper repair order write ups. Prerequisite: Completion of or concurrent enrollment in AUTO 1500. (2 lect., 4 lab)
This is an introductory course in the theory, operation, diagnosis and repair of fuel systems. Emphasis will be on location and interpretation of specifications, proper use of test equipment, accurate diagnosis of malfunctions and the automotive fuel system to include electronic fuel injection and computer controlled carburetors, correct repair procedures, and drive-ability diagnosis. The student will learn written communication with service writers and customers through proper repair order write ups. Prerequisite: Completion of or concurrent enrollment in AUTO 1500 and AUTO 1765. (1 lect., 4 lab)
This course introduces the student to the safe and proper operations of the Snap On 525 multimeter. Emphasis is placed on safe use of the multimeter, how to take accurate measurements of AC voltage, DC voltage, amperage, resistance, and additional multimeter test functions. Emphasis is placed on the proper way of connecting test leads to ensure maximum safety and accuracy when taking measurements. As part of this course students will have the opportunity to become Snap On certified. (0.5 lect.)
This course introduces students to the information needed to complete the Federal Clean Air Act Section 609 certification test for a motor vehicles air conditioning refrigerant technician. This course works in conjunction with the ESCO Institute 609 training manual exam. Students successfully completing this course and the ESCO exam will be certified by the ESCO Institute. (.5 lect.)
This course emphasizes the principles of operation, diagnosis, and repair of clutches, manual transmissions and trans-axles, drivelines, differentials, and front-wheel drive units. Emphasis is placed on understanding the principles of torque multiplication and speed reductions through the use of gearing, location, and interpretation of specifications, and correct troubleshooting and repair procedures. The student will learn written communication with service writers and customers through proper repair order write-ups. Prerequisite: Completion of or concurrent enrollment in AUTO 1500. (3 lect., 6 lab)
This course encompasses the theory of operation, diagnosis, maintenance, and overhaul procedures of automatic transmissions and trans-axles with a major emphasis on the hydraulic systems and electronic controls used in automatic transmissions and trans-axles. The student will learn written communication with service writers and customers through proper repair order write ups. Prerequisite: Completion of or concurrent enrollment in AUTO 1500. (2 lect., 4 lab)
The student will learn the fundamentals of brake operation, service, and repair. Emphasis is on accurate systems inspection, diagnosis, location and interpretation of specifications, use of special tools and equipment, and correct repair procedures with regard to safety and legal responsibility. The student is required to pass strict procedural testing to pass this course. The student will learn written communication with service writers and customers through proper repair order write ups. Prerequisite: Completion of or concurrent enrollment in AUTO 1500 and AUTO 1765. (2 lect., 4 lab)
The focus of this course is on the diagnosis, repair, and alignment of 2WD and 4WD front and rear suspension systems found on automobiles and light trucks. Students will be instructed in suspension evaluation techniques, parts replacement, and alignment strategies expected of entry level technicians. Students will be expected to determine problems with real vehicles, remove and replace components, and use alignment equipment to properly align the steering components on practice vehicles. Front suspension and alignment theory as well as hands on training is stressed in this course. (2 lect., 4 lab)
This course introduces the student to the operation, diagnosis, and servicing of automotive air conditioning and heating systems and components. Emphasis is placed on electronic climate control troubleshooting and repair. The student will learn written communication with service writers and customers through proper repair order write ups. Prerequisite: Completion of or concurrent enrollment in AUTO 1500 and AUTO 1765. (2 lect., 4 lab)
The student will learn the fundamentals of electricity and magnetism, basic DC circuits used in automotive electrical systems, use of meters, wiring diagrams, automotive wiring repair, and the location and interpretation of specifications. Emphasis is placed on theory, operation, diagnosis and repair of starting and charging systems. The student will learn written communication with service writers and customers through proper repair order write ups. Prerequisite: Completion of or concurrent enrollment in AUTO 1500. (2 lect., 4 lab)
This course is an introduction to the basics of semiconductors, microprocessors and selected electronic devices used in automobiles. Theory, operation, diagnosis and repair of ignition computer control and electrical-electronic accessory systems are emphasized in this course. The student will use scan tools, lab scopes, a Digital Volt Ohm Meter, engine analyzers and various other diagnostic equipment to analyze electronic systems and determine necessary repairs. The student will learn written communication with service writers and customers through proper repair order write ups. Prerequisite: Completion of or concurrent enrollment in AUTO 1500 and AUTO 1765. (2 lect., 4 lab)
This course emphasizes the theory, operation, diagnosis, and repair of the systems that affect engine performance. Emphasis is placed on the accurate diagnosis of malfunctions using a variety of modern test equipment and manufacturer-recommended repair procedures. Areas of study include camshaft designs, fuel systems, intake and exhaust systems, performance enhancers, diesel exhaust treatment systems, and diagnostic procedures. Prerequisite: Completion of AUTO 1500, AUTO 1765, and AUTO 1770. (2 lect., 4 lab)
This course is a continuation of Engine Performance I. Areas of study include ignition systems, computerized powertrain controls, computer networks, emission control systems, OBDI/OBDII systems, and diagnostic procedures. Prerequisite: Completion of AUTO 2510. (2 lect., 4 lab)
The focus of this course is on the diagnosis, repair, and alignment of 2WD and 4WD front and rear suspension systems found on automobiles and light trucks. The student is instructed in suspension evaluation techniques, parts replacement, and alignment strategies expected of entry level technicians. The student is expected to determine problems with real vehicles, remove and replace components, and use alignment equipment to properly align the steering components on practice vehicles. Front suspension and alignment theory as well as hands on training is stressed in this course. The student will learn written communication with service writers and customers through proper repair order write ups. Prerequisite: Completion of or concurrent enrollment in AUTO 1500 and AUTO 1765. (2 lect., 4 lab)
This course emphasizes the theory, operation, and diagnosis of malfunctions of automotive emission control systems. Emphasis is placed on the location and interpretation of specifications, accurate diagnosis of malfunctions by proper use of test equipment, correct repair procedures, and diagnosis of drive-ability problems caused by malfunctions of the emission systems. The student will learn written communication with service writers and customers through proper repair order write ups. Prerequisite: Completion of or concurrent enrollment in AUTO 1500 and AUTO 1765. (1 lect., 4 lab)
This independent study course allows students to work on individualized learning projects related to their interest and occupational objectives in automotive technology. Students may earn one, two, or three credits any one semester and may apply no more than 6 credits toward graduation. (4 hours lab per credit)
This course introduces the student to the diagnosis, adjustment, and repairs of the system(s) that affect engine performance. Emphasis is placed on synthesizing skills taught in electronic systems, fuel and emission controls courses. The student is taught to accurately use diagnostic equipment, apply proper tune-up procedures, and use specifications that assist in the interpretation of test results which enable the rapid isolation of malfunctions of a particular system or combination of systems in the automobile. The student will learn written communication with service writers and customers through proper repair order write ups. Prerequisite: Completion of AUTO 1500, AUTO 1765, and AUTO 1770. (2 lect., 4 lab)
