CMV

Choose any course from the AMMP department

Subject

CMV

Type

course

Edition

2026-2027

Catalog

2026-2027 Catalog

Source

catalog.sheridan.edu

This course provides students with the content information necessary to prepare for the Commercial Learner’s Permit. This course provides an overview of the qualifications, restrictions, required tests, services, fees and processes for obtaining a commercial driver’s license (CDL). In addition, this course will identify the CDL classifications (A: Combination Vehicles, B:Heavy Straight Vehicles, C: Small passenger vehicles) and the various endorsements which may be obtained (Passenger, Bus, Tank Vehicle, Double & Triple Trailers). This course provides the student with a basic overview of commercial motor vehicle operations. General overview of conducting vehicle inspection, recognizing, and reporting malfunctions, basic vehicle control elements (steering, acceleration, backing, stopping, shifting). The different types of transmissions (standard, automatic) and dealing with aggressive drives, night driving and hazardous road conditions.

Subject

CMV

Credits (min)

3

Credits (max)

3

Credit unit

Credits

Type

course

Edition

2026-2027

Catalog

2026-2027 Catalog

Source

catalog.sheridan.edu

Prerequisite

Student must be at least 17 years of age. Minimum Credits: 3 Grading: Satisfactory/Unsatisfactory

This course provides students with the content and support to obtain the knowledge contained in the “Wyoming Driver’s License Manual for Commercial & Heavy Vehicles” Commercial Driver’s License (CDL) and familiarity with the Federal Motor Carrier Safety Administration (FMCSA) driver regulations and standards. The student will receive instruction on how to operate a Commercial Motor Vehicle (CMV), understand applicable rules and regulations and obtain skills required to competently drive and operate a CMV properly, safely, and efficiently. Training will be provided to ensure the student will successfully pass the computer-based test Commercial Learner’s Permit (CLP) administered by the Wyoming Driver’s License Division on the subjects of general knowledge, air brake, and combination vehicles.

Subject

CMV

Credits (min)

1

Credits (max)

1

Credit unit

Credits

Type

course

Edition

2026-2027

Catalog

2026-2027 Catalog

Source

catalog.sheridan.edu

Prerequisite

CMV 1500 CMV Entry Level Driver Training with a grade of S. Students must be at least 17 years of age. Minimum Credits: 1 Grading: Satisfactory/Unsatisfactory

This course introduces students to the essential knowledge required for entry into commercial motor vehicle (CMV) operations and related technology fields. Students will build professional competencies in resume writing, communication, ethics, customer service, and computer literacy using modern browser-based tools and learning management systems. Instruction includes topics associated with entry-level driver training and an overview of the Wyoming Driver’s License Manual for Commercial & Heavy Vehicles and Federal Motor Carrier Safety Administration (FMCSA) regulations The course prepares students to obtain the Commercial Learner’s Permit (CLP) by covering general knowledge, air brake systems, and combination vehicle topics. It also lays the groundwork for pursuing full Commercial Driver’s License (CDL) certification and endorsements.

Subject

CMV

Credits (min)

7

Credits (max)

7

Credit unit

Credits

Type

course

Edition

2026-2027

Catalog

2026-2027 Catalog

Source

catalog.sheridan.edu

Prerequisite

Submission of 10-year Motor Vehicle Record (MVR), 17 years of age, and Instructor Consent. Minimum Credits: 7 Grading: Satisfactory/Unsatisfactory

This course provides hands-on and observational training in the safe operation of Commercial Motor Vehicles (CMVs) and designated equipment. Students complete a minimum of 10 hours of observation or ride-along experience prior to operating vehicles. Instruction covers essential and advanced driving techniques, including control, backing, shifting, signaling, hazard perception, and operation in varied conditions. As the final step in the CMV licensure sequence, students demonstrate safe vehicle operation under instructor supervision. Completion prepares students to apply for CDL licensure or endorsements. Repeatable for credit based on endorsement or certification pursued; applicable to AAS degrees and certificate programs.

Subject

CMV

Credits (min)

6

Credits (max)

6

Credit unit

Credits

Type

course

Edition

2026-2027

Catalog

2026-2027 Catalog

Source

catalog.sheridan.edu

Prerequisite

Submission of 10-year Motor Vehicle Record (MVR), CDL Learners Permit, DOT Medical Card, Entry Level Driver Training certification, and instructor consent. Minimum Credits: 6 Grading: Satisfactory/Unsatisfactory

This course will provide students with the necessary knowledge related to the rules, regulations, and safe operation of a commercial passenger vehicle. Employees who operate passenger vehicles transporting individuals are required to have a passenger vehicle endorsement (P endorsement) on their license. To apply for a passenger endorsement, drivers must qualify for a passenger vehicle endorsement and must successfully pass knowledge and skills tests. This course may be applied as credit to any appropriate AAS degree or certificate program.

Subject

CMV

Credits (min)

2

Credits (max)

2

Credit unit

Credits

Type

course

Edition

2026-2027

Catalog

2026-2027 Catalog

Source

catalog.sheridan.edu

Prerequisite

Successful completion of CMV 1505 CLP Transportation Safety Regs or CMV 1508 CDL Prep, a current CDL or CLP, minimum of 17 years of age, and consent of instructor. Minimum Credits: 2 Grading: Satisfactory/Unsatisfactory

This course provides comprehensive training in the operation of Class A Commercial Motor Vehicles (CMVs) and prepares students to obtain a Class A Commercial Driver’s License (CDL) without additional endorsements. Students receive both classroom instruction and hands-on driving experience focused on the safe and efficient operation of combination vehicles such as dual wheeled pickup and trailer combinations. Instruction emphasizes vehicle inspections, control systems, shifting techniques, coupling and uncoupling procedures, and safe driving maneuvers including turning, backing, and parking. Students will also develop proficiency in applying Federal Motor Carrier Safety Administration (FMCSA) and Wyoming Department of Transportation (WYDOT) regulations, including Hours of Service (HOS), driver qualifications, and recordkeeping requirements. Training includes classroom, range, and over-the-road driving experience under instructor supervision.

Subject

CMV

Credits (min)

4

Credits (max)

4

Credit unit

Credits

Type

course

Edition

2026-2027

Catalog

2026-2027 Catalog

Source

catalog.sheridan.edu

Prerequisite

Submission of 10-year Motor Vehicle Record (MVR), Entry Level Driver Training certification, Commercial Learner’s Permit (CLP), DOT Medical Card, DOT Drug Test, and Instructor Consent. Minimum Credits: 4 Grading: Satisfactory/Unsatisfactory

This course will provide students with the necessary knowledge related to the rules, regulations, and safe operation of a school bus. Employees who operate school buses transporting students from home to school, school to home, or to any school-sponsored events, are required to have a school bus endorsement (S endorsement) on their license. To apply for a school bus endorsement, drivers must qualify for a passenger vehicle endorsement and must pass a knowledge and skills test. This course may be applied as credit to any appropriate AAS degree or certificate program.

Subject

CMV

Credits (min)

1

Credits (max)

1

Credit unit

Credits

Type

course

Edition

2026-2027

Catalog

2026-2027 Catalog

Source

catalog.sheridan.edu

Prerequisite

Successful completion of CMV 1520 Passenger Endorsement and consent of instructor. Minimum Credits: 1 Grading: Satisfactory/Unsatisfactory

This course prepares students to safely operate a Class B Commercial Motor Vehicle (CMV) and Class B CMV with a Passenger endorsement. Training includes both classroom and behind-the-wheel instruction focused on passenger safety, vehicle inspections, mirror usage, turns, backing, and operating in various traffic and weather conditions. Students will also learn Federal Motor Carrier Safety Administration (FMCSA) and Wyoming Department of Transportation (WYDOT) rules related to Hours of Service, driver qualifications, and record keeping. Upon successful completion, students will be prepared to test for the Wyoming Class B Commercial Driver’s License (CDL) with a Passenger endorsement.

Subject

CMV

Credits (min)

4

Credits (max)

4

Credit unit

Credits

Type

course

Edition

2026-2027

Catalog

2026-2027 Catalog

Source

catalog.sheridan.edu

Prerequisite

Submission of the following: Ten (10)-year Motor Vehicle Record (MVR), DOT Medical Card, DOT Drug Test, CMV 1500 successful completion or other approved Entry Level Driver Training certification, Class B Commercial Learners permit or Class A or Class B license, and Successful completion of CMV 1520 Passenger Bus ELDT or other approved Passenger Bus ELDT certification. Minimum Credits: 4 Grading: Satisfactory/Unsatisfactory

This course will provide students with the necessary skills to perform basic Commercial Motor Vehicle (CMV) or other specified equipment inspections related engine compartment, fuel area, underside, rear axle, rear of vehicle, coupling system for tractor and trailer, trailer axels, rear of trailer, light operations, in-cab procedures, and/or inspection and safe operation capabilities of other equipment components. The student shall operate the CMV or specified equipment in a safe and controlled manner while receiving instructions from the instructor. This course may be repeated for credit for each CMV endorsement or equipment training certification sought by the student. This course may be applied as credit to any appropriate AAS degree or certificate program.

Subject

CMV

Credits (min)

2

Credits (max)

2

Credit unit

Credits

Type

course

Repeatable

may be repeated for credit for each CMV endorsement or equipment training certification sought by the student.

Edition

2026-2027

Catalog

2026-2027 Catalog

Source

catalog.sheridan.edu

Prerequisite

Consent of instructor Minimum Credits: 2 Grading: Satisfactory/Unsatisfactory

This course will provide students with the up to ten(10) hours of simulated skills training. The student will experience simulated operation scenarios and demonstrate the ability to perform basic Commercial Motor Vehicle (CMV), or other designated vehicle or equipment maneuvers which could include: basic shift patterns, double clutching, bob tailing, driving with small trailer driving with large trailer and backing. Scenarios and exercises will be performed on the simulator as designated by the instructor. Vertigo may be an issue to some students. Anti-vertigo wrist bands will be provided upon request. In addition, a simulator waiver shall be completed and returned to the instructor prior to the start of the simulator training. This course may be repeated for credit for each CMV endorsement or equipment training certification sought by the student or in the event that a student does not successfully demonstrate the skills necessary to operate the vehicle or designated equipment. This course may be applied as credit to any appropriate AAS degree or certificate program.

Subject

CMV

Credits (min)

1

Credits (max)

1

Credit unit

Credits

Type

course

Repeatable

may be repeated for credit for each CMV endorsement or equipment training certification sought by the student or in the event that a student does not successfully demonstrate

Edition

2026-2027

Catalog

2026-2027 Catalog

Source

catalog.sheridan.edu

Prerequisite

Consent of instructor and completion of simulation waiver form. Minimum Credits: 1 Grading: Satisfactory/Unsatisfactory Comments: This course is

This course will provide students with at least ten (10) hours of observation and/or ride-along opportunities to study the safe operation of Commercial Motor Vehicle (CMV), or other designated vehicle or equipment prior to student’s operation of vehicle or equipment. This course may be repeated for credit for each CMV endorsement or vehicle or equipment training certification sought by the student or in the event that a student does not successfully demonstrate the skills necessary to operate the vehicle or designated equipment. This course may be applied as credit to any appropriate AAS degree or certificate program.

Subject

CMV

Credits (min)

1

Credits (max)

1

Credit unit

Credits

Type

course

Repeatable

may be repeated for credit for each CMV endorsement or vehicle or equipment training certification sought by the student or in the event that a student does not successfully d

Edition

2026-2027

Catalog

2026-2027 Catalog

Source

catalog.sheridan.edu

Prerequisite

Consent of instructor. Minimum Credits: 1 Grading: Satisfactory/Unsatisfactory

Hazmat Endorsement ELDT ( Entry Level Driver Training) course provides essential training for entry-level drivers seeking hazardous materials endorsement. The course covers key topics, including federal regulations, safe handling and transport of hazardous materials, vehicle inspection procedures, emergency response actions, and proper documentation. Designed to meet FMCSA requirements, this course equips drivers with the knowledge and skills needed to safely and legally transport hazardous materials.

Subject

CMV

Credits (min)

1.5

Credits (max)

1.5

Credit unit

Credits

Type

course

Edition

2026-2027

Catalog

2026-2027 Catalog

Source

catalog.sheridan.edu

Prerequisite

Students must receive Instructor consent to register for this course. Minimum Credits: 1.5 Grading: Satisfactory/Unsatisfactory

This course will provide students with skills to perform basic Commercial Motor Vehicle (CMV) or other designated vehicle or equipment maneuvers related to vehicle control, straight line backing, offset backing, alley-dock backing, parallel parking, shifting gears, communications, signaling, visual searches, speed and space management, hazard perception, railroad crossings, night operations, extreme driving conditions and skid control, recovery and jackknifing. The student shall drive and operate the CMV or other designated vehicle or equipment in a safe and controlled manner while receiving instructions from the instructor. This course may be repeated for credit for each CMV endorsement or vehicle or equipment training certification sought by the student. This course may be applied as credit to any appropriate AAS degree or certificate program.

Subject

CMV

Credits (min)

2

Credits (max)

2

Credit unit

Credits

Type

course

Repeatable

may be repeated for credit for each CMV endorsement or vehicle or equipment training certification sought by the student.

Edition

2026-2027

Catalog

2026-2027 Catalog

Source

catalog.sheridan.edu

Prerequisite

Consent of instructor. Minimum Credits: 2 Grading: Satisfactory/Unsatisfactory Comments: This course is

This course will provide students with skills to pertinent to safely operate a Commercial Motor Vehicle (CMV) or other designated vehicle or equipment. This is the final course in CMV licensure program. Successful completion of this course will allow the student to apply for and receive CDL licensure or endorsement. The student will learn to operate the CMV or other designated vehicle or equipment in a safe and controlled manner while receiving instructions from the instructor. This course may be repeated for credit for each CMV endorsement or vehicle or equipment training certification sought by the student.

Subject

CMV

Credits (min)

3

Credits (max)

3

Credit unit

Credits

Type

course

Repeatable

may be repeated for credit for each CMV endorsement or vehicle or equipment training certification sought by the student.

Edition

2026-2027

Catalog

2026-2027 Catalog

Source

catalog.sheridan.edu

Prerequisite

Successful completion of CMV 1700 Driving-Range or consent of instructor. Minimum Credits: 3 Grading: Satisfactory/Unsatisfactory

This Forklift Training and Certification safety course satisfies the OSHA requirements for classroom and skills training for forklift operators in industrial, construction, transportation, and warehouse industries. This course will highlight different areas of forklift safety rules and operation in general industry settings. It is imperative that students fully understand all aspects of forklift operations, the different circumstances and situations regarding their work environment, and the exact type of forklift trucks they will be using. Students will have hands-on training driving and operating forklifts in different practical scenarios. Students can earn OSHA forklift certification relevant to the classification of training equipment used. Minimum

Subject

CMV

Credits (min)

0.5

Credits (max)

0.5

Credit unit

Credits

Type

course

Edition

2026-2027

Catalog

2026-2027 Catalog

Source

catalog.sheridan.edu