ETGR 1100LEngineering Technology Computer Applications Laboratory
(1) *
- Subject
- ETGR
- Type
- course
- Edition
- 2026-2027
- Source
- catalog.charlotte.edu
University of North Carolina at Charlotte · Courses
ETGR
24 courses with the subject ETGR, each shown exactly as we captured it from the college's catalog, with every element we hold. Where the wording looks broken, that is our reading of the catalog, not the college's text.
ETGR 1101Introduction to Engineering Technology and Construction
Management (1) *
- Subject
- ETGR
- Type
- course
- Edition
- 2026-2027
- Source
- catalog.charlotte.edu
ETGR 1103Technical Drawing I3
College of Engineering | 277
- Subject
- ETGR
- Credits (min)
- 3
- Credits (max)
- 3
- Type
- course
- Edition
- 2026-2027
- Source
- catalog.charlotte.edu
ETGR 1201Introduction to Engineering Technology. (2) Pre- or
Corequisite Course(s): MATH 1100 or MATH 1101. College of Engineering majors only. Permission of department required for non-majors. An introduction to disciplines and professional skills in the engineering technology and construction management professions. Topics include: academic, personal, and professional development; teamwork; engineering design; mathematical problem solving; and oral and written communication skills. ETGR 2101. Applied Mechanics I. (3) Prerequisite(s): MATH 1103 and Engineering major or minor. Fundamentals and applications of statics to include the analysis of force systems using analytical and graphical methods. Included topics are systems of forces, friction, equilibrium of particles and rigid bodies, distributed force systems, centroids and moments of inertia, and introduction to analysis of structures. In addition, stress, deformation, and strain are presented. ETGR 2102. Applied Mechanics II. (3) Prerequisite(s): ETGR 2101 with grade of C or above; and Engineering major or minor. Fundamentals of mechanics of deformable bodies. Topics of study include building loads, stress and strain, thermal deformation and stress, axial load, statically indeterminate axially loaded members, the principle of superposition, torsion, bending and shear stresses in beams, deflection of beams, transformation of stress and strain, Mohr’s circle, and stability and buckling of columns.
- Subject
- ETGR
- Type
- course
- Edition
- 2026-2027
- Source
- catalog.charlotte.edu
ETGR 2101Applied Mechanics I3
* Must be completed with a grade of C or above. Restricted Elective Courses (6 credit hours) Select two of the following from departmental and non-departmental courses:
- Subject
- ETGR
- Credits (min)
- 3
- Credits (max)
- 3
- Type
- course
- Edition
- 2026-2027
- Source
- catalog.charlotte.edu
ETGR 2102Applied Mechanics II3
- Subject
- ETGR
- Credits (min)
- 3
- Credits (max)
- 3
- Type
- course
- Edition
- 2026-2027
- Source
- catalog.charlotte.edu
ETGR 2106Electronic Circuits and Devices3
274 | College of Engineering
- Subject
- ETGR
- Credits (min)
- 3
- Credits (max)
- 3
- Type
- course
- Edition
- 2026-2027
- Source
- catalog.charlotte.edu
ETGR 2230Occupational Safety3
- Subject
- ETGR
- Credits (min)
- 3
- Credits (max)
- 3
- Type
- course
- Edition
- 2026-2027
- Source
- catalog.charlotte.edu
ETGR 2272Engineering Analysis II3
- Subject
- ETGR
- Credits (min)
- 3
- Credits (max)
- 3
- Type
- course
- Edition
- 2026-2027
- Source
- catalog.charlotte.edu
ETGR 3000Special Topics in Engineering Technology. (1 to 4)
Prerequisite(s): Senior standing and Engineering Technology major; or permission of department. Examination of specific new areas which are emerging in the various fields of engineering technology. The course builds upon the knowledge the students have gained from their engineering technology curriculum. May be repeated for credit. ETGR 3171. Engineering Analysis III. (3) Prerequisite(s): ETGR 2272 or MATH 1242 with grade of C or above; and Engineering major or minor. A continuation of engineering analysis which includes additional topics and applications in differential equations and linear algebra.
- Subject
- ETGR
- Type
- course
- Repeatable
- May be repeated for credit.
- Edition
- 2026-2027
- Source
- catalog.charlotte.edu
ETGR 3171Engineering Analysis III3
or ETGR 4272 - Engineering Analysis IV (3)
- Subject
- ETGR
- Credits (min)
- 3
- Credits (max)
- 3
- Type
- course
- Edition
- 2026-2027
- Source
- catalog.charlotte.edu
ETGR 3222Engineering Economics3
Occupational Safety and Fire Safety Courses (51 credit hours) The following courses primarily represent the occupational safety field with supporting coursework from fire safety, organizational psychology, and risk management.
- Subject
- ETGR
- Credits (min)
- 3
- Credits (max)
- 3
- Type
- course
- Edition
- 2026-2027
- Source
- catalog.charlotte.edu
ETGR 3295Multidisciplinary Professional Development1
*Must be completed with a grade of C or above. Concentration Courses (15 credit hours) In addition to required courses ETCE 2410 and ETCE 3242 or ETCE 3271, select three of the following:
- Subject
- ETGR
- Credits (min)
- 1
- Credits (max)
- 1
- Type
- course
- Edition
- 2026-2027
- Source
- catalog.charlotte.edu
ETGR 3695Engineering Technology Practicum Seminar1
Prerequisite(s): ENGR 3500 and Engineering major or minor. Required during the semester immediately following each work assignment for students enrolled in ENGR 3500 for presentation of engineering reports (verbal and oral) on work done the prior semester. May be repeated for credit. ETGR 4100. Capstone Design Project I. (2) Prerequisite(s): ETME 3100 (for Mechanical Engineering Technology students); Engineering major or minor; Senior standing; and completion of all lower-division courses and deficiencies. ETEM 3281 (for Electrical Engineering Technology students); ETME 3113; ETME 3143 or ETME 3250; ETME 3150; and ETME 3213 (for Mechanical Engineering Technology students). First of a two- semester course sequence in which student teams implement a Senior- level design project which demonstrates abilities as developed by the 2026-2027 UNC CHARLOTTE UNDERGRADUATE CATALOG
- Subject
- ETGR
- Credits (min)
- 1
- Credits (max)
- 1
- Type
- course
- Repeatable
- May be repeated for credit.
- Edition
- 2026-2027
- Source
- catalog.charlotte.edu
ETGR 4272Engineering Analysis IV3
- Subject
- ETGR
- Credits (min)
- 3
- Credits (max)
- 3
- Type
- course
- Edition
- 2026-2027
- Source
- catalog.charlotte.edu
ETGR 4301Environmental Pollution Control3
- Subject
- ETGR
- Credits (min)
- 3
- Credits (max)
- 3
- Type
- course
- Edition
- 2026-2027
- Source
- catalog.charlotte.edu
ETGR 4302Introduces the industrial hygienist's role in
characterizing chemical, physical, and biological hazards in the workplace. Topics include: occupational standards and regulations, indoor air quality, ionizing and non-ionizing radiation, thermal stress, sampling/monitoring techniques, personal protective equipment, engineering controls, and program management.
- Subject
- ETGR
- Type
- course
- Edition
- 2026-2027
- Source
- catalog.charlotte.edu
ETGR 4303Applied Ergonomics and Human Factors3
Elective Courses (3 credit hours) Select one of the following for 3 elective credit hours. Students are encouraged to take electives outside their major department and college to gain a broader perspective. Please note that some courses may have prerequisites or other requirements.
- Subject
- ETGR
- Credits (min)
- 3
- Credits (max)
- 3
- Type
- course
- Edition
- 2026-2027
- Source
- catalog.charlotte.edu
ETGR 4305System Safety Design and Management3
- Subject
- ETGR
- Credits (min)
- 3
- Credits (max)
- 3
- Type
- course
- Edition
- 2026-2027
- Source
- catalog.charlotte.edu
ETGR 5272Engineering Analysis IV3
Coursework Sequence (21 credit hours) Elective Courses (21 credit hours) Select from the following or others with director approval:
- Subject
- ETGR
- Credits (min)
- 3
- Credits (max)
- 3
- Type
- course
- Edition
- 2026-2027
- Source
- catalog.charlotte.edu
ETGR 5301Environmental Pollution Control3
- Subject
- ETGR
- Credits (min)
- 3
- Credits (max)
- 3
- Type
- course
- Edition
- 2026-2027
- Source
- catalog.charlotte.edu
ETGR 5302Industrial Hygiene3
- Subject
- ETGR
- Credits (min)
- 3
- Credits (max)
- 3
- Type
- course
- Edition
- 2026-2027
- Source
- catalog.charlotte.edu
ETGR 5303Applied Ergonomics and Human Factors3
Cross-listed Course(s): ETGR 4303. An overview of the physiological, biomechanical, and psychological concepts related to workplace layout, machine tools, and work methods. An emphasis is placed on the control and prevention of injuries from over-exertion and related musculoskeletal disorders. ate Catalog 2026-2027
- Subject
- ETGR
- Credits (min)
- 3
- Credits (max)
- 3
- Type
- course
- Edition
- 2026-2027
- Source
- catalog.charlotte.edu
ETGR 5305System Safety Design and Management3
Cross-listed Course(s): ETGR 4305. Prerequisite(s): Permission of department. Application of techniques and concepts of system safety methodologies and process safety management. Emphasis on the application of scientific, design and management principles incorporating safety audits, safety management, risk assessment, loss control, and statistical applications across all phases of a system life cycle.
- Subject
- ETGR
- Credits (min)
- 3
- Credits (max)
- 3
- Type
- course
- Edition
- 2026-2027
- Source
- catalog.charlotte.edu
Source: University of North Carolina at Charlotte's catalog, linked per course · table learning_unit · CourseShelf publish 61