Pennsylvania State University-Penn State Erie-Behrend College · Courses
EET
46 courses with the subject EET, each shown exactly as we captured it from the college's catalog, with every element we hold. Where the wording looks broken, that is our reading of the catalog, not the college's text.
EET 100Electric Circuits, Power, and Electronics3
AC and DC circuits; machinery; controls; and introduction to electronic devices, circuits, and instrumentation. EET 100 Electric Circuits, Power, and Electronics (3) Electric Circuits, Power, and Electronics is a course for non-major students who will be working with electronic equipment in industry. This course starts with basic knowledge of DC and AC components and concepts used in industrial electrical work. Topics such as circuits, electromagnetism, sources, energy conversion and electrical instruments prepare students to continue with topics in electronics. Beginning with the basics of semiconductors and moving through diodes and transistors, the student is prepared to learn the concepts of rectification and amplification. These form a foundation for the completion of the course with a look at understanding the concepts and use of analog and digital circuitry found in Programmable Logic Control (PLC) systems used in industry today. Enforced Prerequisite at Enrollment: MATH 82 or MATH 41
Introduction to the study of electrical systems, with a focus on applications in our society. EET 105 Electrical Systems (3) is an introductory course in electrical systems and circuits. It is an entry level course intended to give students the big picture of the electrical technology spectrum. The course will cover the fundamentals circuit analysis such as: Kirchoff's laws, parallel and series circuits, and superposition. The course then applies this knowledge to various commonplace electrical systems (toaster, electric toothbrush, fan, etc.). The course also gives students a broad, limited exposure to the breath of electrical systems by including components and topics such as resistors, capacitors, inductors, switches, relays, fuses, amplifiers, transformers and motors. Topics covered include: - Electrical Safety and House Wiring - Electrical Science - Electrical Generation and Utilization - Electrical Circuits and Analysis - Electrical Instrumentation and Measurements - Electronics - Electrical Systems - Electrical Machines The course will emphasize the basic concepts, principles, and analytical models used by engineers and technologists to design, develop and test electrical systems The course does so from a top down, non-detailed systems perspective. Upon competition of this course, students will have a broad perspective of the electrical technology spectrum as they gain a deeper focused knowledge in subsequent courses. Lectures will be supported by laboratory exercises in which the student learns about electrical instrumentation and performs electrical measurements on circuits and systems. Students will also be required to complete an electrical system project of their choosing. Students will be required to prepare written laboratory reports outlining the laboratory activity. Reports will be graded based both on their technical quality and their grammatical and professionalism. Students in EET 105 will be required to use computers in both class and laboratory exercises to simulate electrical circuits and systems and also produce high quality laboratory reports. Enforced Prerequisite: MATH 21 or satisfactory performance on the mathematics placement examination.
Use of basic electrical instruments to measure AC and DC voltage, current, power, resistance. Introduction to report writing. EET 109 Electric Circuits Laboratory I (1) Electric Circuits Laboratory I provides a variety of experiences building electric circuits and utilizing voltmeters, ammeters, ohmmeters and oscilloscopes to take electrical readings. Emphasis is placed on using computer spreadsheet software and computer analysis software. Throughout the course, technical writing is utilized to describe electrical experiment results. Concepts presented in EET 101 are utilized through this course.Experiments related to resistor color code, the ohmmeter and Ohm's Law provide a elementary understanding of resistance as well as the measurement of voltage, electric current and resistance. Experiments with resistors in series, l parallel and series-parallel arrangements provide experience with electric circuit construction and electric circuit analysis in a laboratory situation. Kirchhoff's Voltage Law (KVL) and Kirchhoff's Current Law (KCL) receive
Direct and alternating current circuit analysis including Thevenin and Norton Theorems, mesh, node analysis. Capacitance, inductance, resonance, power, polyphase circuits. EET 114 ELECTRICAL CIRCUITS II (4) Electrical Circuits II is the second of two circuit courses aimed at developing fundamentals of electrical circuit operation and analysis. It covers topics in graphical analysis of circuit operation; capacitive, inductive, and magnetic circuits; and sinusoidal excitation and AC reactance due to inductors and capacitors.EET 114 is normally taken in the second semester of the freshman year concurrently with a coordinated lab course, EET 118. Completion of EET 114 provides a student with all the circuit analysis fundamentals that will be needed for later courses in electronics and AC machinery. Enforced Prerequisite at Enrollment: EET 105 and MATH 26
EET 212WOp Amp and Integrated Circuit Electronics4
Analysis and design of amplifier, rectifier, filter, comparator, oscillator, and other practical circuits using op amps and integrated circuit devices. EET 212W Op Amp and Integrated Circuit Electronics (4)EET 212W provides students with a basic understanding of the operation and functions of general-purpose linear and non-linear electronic circuits typically found in industrial applications. The course provides background on the basic operating characteristics of key semiconductor devices e (diodes, transistors, FETs, etc.); however, the emphasis is on the operation, analysis, design, and application of circuits that use op-amp's and various linear integrated circuit devices to perform typical electronic functions. Topics covered include:- Open- and closed-loop amplifier operation and feedback concepts - Inverting, non-inverting, differential, and instrumentation amplifiers - Summers, comparators, clippers, clampers, and function generator circuits - Integrators and differential circuits - Filter and oscillator circuits - Rectifier and regulator circuits The course will emphasize the concepts, principles, procedures, models, and computations used by engineers and technologists to analyze, select, specify, test, maintain, and design modern electronic systems. Particular emphasis will be given to circuits and applications prevalent in modern instrumentation and control systems. Modeling detail and the sophistication of mathematical analyses will emphasize the application of standard methods with the aid of computers. Lectures will be supported by laboratory exercises in which students will investigate actual operating characteristics of devices and circuits explained in the classroom. Lab activities will emphasize comparisons of theoretical and actual performance. Students will also be expected to develop proficiency making electronic circuit measurements using standard laboratory instruments. Laboratory activities will also form the basis for the 'W' designation assigned to this course. Students will be required to use standard analysis and reporting tools to prepare formal, written laboratory reports for a substantial portion of all laboratory activities undertaken in the class. Reports will be graded based both on their technical and grammatical quality and on their professionalism. A complete understanding of the electronic circuits covered in this course requires the use of computers. Thus, students in EET 212W will be required to use computers in both class and laboratory exercises to model and simulate the relevant performance of circuits studied. Enforced Prerequisite at Enrollment: EET 114 and ENGL 15 and (MATH 22 or MATH 40 or MATH 82) Writing Across the Curriculum
EET 213WFundamentals of Electrical Machines Using Writing Skills5
AC and DC machinery principles and applications; introduction to magnetic circuits, transformers, and electrical machines including laboratory applications. EET 213W Fundamentals of Electrical Machines Using Writing Skills (5) EET 213W is devoted to the study of ac and dc electrical machines and power conversion equipment. The course teaches fundamental concepts of electromagnetic circuits as they relate to the physical forces that act on electrical conductors moving in magnetic fields, and the electrical currents and voltages induced in those conductors by that same motion. The course covers characteristics of magnetic materials and how they influence the operation of electrical machines, and investigates how these properties and principles are used to develop simple yet practical models of various electromotive and power conversion devices. Presentation of principles and theory will be relatively rigorous; however, the level of modeling detail and the sophistication of mathematical analyses of machine operation will be limited to first order (i.e., linear) and some simple second-order (non- linear) approximations. Students in EET 213W should gain a sound understanding of how and why ac and dc motors and generators, and single phase ac transformers work as they do. The understanding should extend to cover most types of motors, generators, and transformers commonly used in industry today. Students should also understand and be able to apply the basic mathematical and electrical models
Fundamental operating principles, characteristics, and analysis of electric machines, transformers, and power systems. EET 214 Electric Machines and Energy Conversion (3)The purpose of EET 214 is to introduce students to the electromechanical energy conversion components associated with power system generation, utilization, transmission, and distribution. The course teaches fundamental concepts of electromagnetic circuits as they relate to the induced voltages and physical forces acting on electrical conductors within magnetic fields. The course covers characteristics of magnetic materials and how they influence the operation of rotating electrical machines and transformers, and investigates how these properties and principles are used to develop simple yet practical models of various power conversion devices. Basic control of AC motors, such as starting, reversing, plugging and variable speed operation using volts per hertz is discussed in the course. Following the study of the basic components of the power system (motors, generators, and transformers), the course will provide an introduction to power systems engineering. This introduction shall include any the following topics: power distribution fundamentals and protection, power flow, analysis and load flow studies of small power systems, and computer solutions for larger power system studies. Topics covered include:- Magnetics: energy conversion principles, motor and generator action- Transformers: Single-phase, 3-phase, and autotransformers; per-unit representation- Induction Machines: construction, operation, modeling, characteristics, and basic control methods- Synchronous Machines: construction, operation, modeling, characteristics, motor and generator operation, power factor control, power delivery- Power System Representation- Power System Analysis Presentation of the principles and theory will be relatively rigorous; however, the level of modeling detail and the sophistication of the mathematical analyses of machine operation will be limited to first order (i.e. linear) and some simple second-order (non-linear) approximations. Students in EET 214 should gain a sound understanding of electrical machines and transformers and their models, and this knowledge should be extended so that the models are used in the analysis of power systems. Students should be able to apply the basic mathematical and electrical models developed in the course to determine power requirements, power capability, efficiency, operating characteristics, and electrical demands of these components when used in typical applications. The course will require that students apply basic knowledge of electric circuit analysis, electric machines, and engineering concepts to analyze and solve technical problems, using the assistance of computer tools as necessary. Enforced Prerequisite at Enrollment: EET 114 and EET 118 Undergraduate - The Pennsylvania State University 2026-2027 4041
EET 215Electric Machines and Energy Conversion Laboratory1
d Laboratory study of electric machine applications, transformers, and power systems. EET 215 Electric Machines and Energy Conversion Laboratory (1)The purpose of EET 215 is to provide students with practical experience with electromechanical energy conversion components associated with power system generation, utilization, transmission, and distribution. The laboratory experiments in this course will demonstrate empirically the concepts introduced in the companion lecture course, EET 214. Topics covered include: -Magnetics: energy conversion principles, motor and generator action -Transformers: single-phase, 3-phase, autotransformers; per unit representation - Induction machines: operation, modeling, characteristics, basic controls -Synchronous machines: motor, generator, power factor control -Power system representation and analysis Laboratory activities will require that students apply basic knowledge of electric circuit analysis, electric machines, and engineering concepts to analyze and solve technical problems, using the assistance of computer tools as necessary. Students will be expected to develop proficiency in instrumentation using standard lab equipment, and will be required to use standard analysis and reporting tools to prepare formal laboratory reports and oral presentations. Enforced Prerequisite at Enrollment: EET 114 and EET 118 Enforced Concurrent at Enrollment: EET 214
EET 275Introduction to Programmable Logic Controls3
, Principles of industrial control, programming, interfacing, input/output devices, and applications. EET 275 Introduction to Programmable Logic Controls (3)Introduction to Programmable Logic Controls is a required course for sophomore-level students in the Electrical and Computer Engineering Technology (ECET) baccalaureate degree program. Programmable Logic Controllers are one of the fastest growing multi- billion dollar segments of industry. This course provides an in-depth introduction to these devices and their use in modern process industries. Starting with an overall look at the block and modular type PLC, digital inputs, digital outputs and devices such as pushbuttons, pressure switches, motors, and indicators demonstrate the elementary application and system design to which they are applied. Ladder logic programming techniques encompass gate logic, contact/coil logic, timers, counters, arithmetic functions and number comparisons. An introduction to analog input and output applications, along with study of the Proportional +Integral+Differential (PID) process function, and PLC communication networks prepare the technologist for advanced courses on these topics. The lab component of this course provides live experience with all these concepts along with industrial problem solving experience by using indicating and actuating real-time positional and process applications. Enforced Prerequisite at Enrollment: CMPET 117 and CMPET 120
/Maximum of 18 Creative projects, including research and design, that are supervised on an individual basis and that fall outside the scope of formal courses.
EET 310 provides an introduction to basic electrical principles and covers the DC and AC circuit analysis techniques necessary for most upper- level EET courses. The course covers DC and AC sources, capacitors and inductors, impedance, mutual inductance, ideal transformers, phasor diagrams, power and energy calculations in DC and AC Circuits, signal and energy transfer, and an introduction to three-phase systems. It also introduces ideal amplifier models and ideal operational amplifiers and their use in performing mathematical operations on analog signals. Circuit analysis techniques covered include nodal analysis, mesh analysis, linearity, superposition, source transformation, and one-port networks (Thevenin's and Norton's Theorems) and two-port networks (Z, Y, h, and T) as equivalent circuits. Topics covered in the course are supported by weekly hands-on laboratory experiences. Enforced Concurrent at Enrollment: MATH 140 and (PHYS 150 or PHYS 250 or PHYS 211)
& EET 114 and Electrical Circuits II Requirements for the Option Select an option 26 2-3 EET 114 does not require a grade of C or better. Requirements for the Option ter General Electrical Engineering Technology Option (26 credits) Available at the following campuses: Harrisburg, Wilkes-Barre Code Title Credits
EET 312 is designed to provide students with a strong foundation in transient circuit analysis in addition to introduction to signals and systems. The primary objective of the course is to reinforce continuous- time system fundamentals in order to prepare the students for more advanced work in a broad range of areas including communications, control, signal processing and image processing. The topics covered in this course include: Applied differential equations; Transient analysis of RC, RL, and RLC circuits, using differential equations; Complex frequency; Network functions; Bode plots and frequency response; Filter networks and resonant circuits; Laplace transform pairs and their applications in circuit analysis; Fourier analysis techniques and their applications in circuit analysis; State-variable circuit analysis. This course is a required course in the Electrical Engineering Technology BS curriculum and is intended to be taken by students who have completed their first circuits course requirements. Enforced Prerequisite at Enrollment: EET 310 or EET 311 or EE 314 Enforced Concurrent at Enrollment: MATH 141 and (PHYS 151 or PHYS 212 or PHYS 251)
Introduction to the principles and operation of linear and discrete systems. EET 315 Linear and Discrete System Analysis (3) Linear and Discrete System Analysis is a required course for junior-level students in the Electrical and Computer Engineering Technology (ECET) baccalaureate degree program. The purpose of the course is to introduce the students to linear system analysis, primarily using Laplace transforms. Students learn the concept of a transfer function, and are able to analyze both the transient and steady state response of a system. Students then learn about discrete time systems, including z-transforms, difference equations, and basic digital filters. Laboratory exercises reinforce concepts developed in lecture. Enforced Prerequisite at Enrollment: CMPET 301 Enforced Concurrent at Enrollment: MATH 250 or MATH 211
Basic circuit theory applied to DC/AC circuits containing resistors, inductors, capacitors; magnetic circuits; power; control; electronic applications. EET 320 Industrial Electricity and Electronics (3) This course is designed to offer non-electrical students the opportunity to become familiar with the theory and operation of electrical, electronic, and electromechanical devices that are widely used in practice. The is course concentrates on the most important concepts, rather than in- depth treatment of any individual area. The number of units covered depends on the class background. The topics covered in this course include:1. Introduction 2. DC Networks 3. AC Networks 4. Magnetics 5. DC & AC Machinery 6. Selected topics depending on class background (if time permits): Basic electronic devices and their applications; Integrated circuits and their applications; Power Distribution; Transducers & signal conditioning; Control Systems Electronic Instrumentation. Enforced Prerequisite at Enrollment: MATH 140 and (PHYS 150 or PHYS 250 or PHYS 211)
Wireless communications technology, transceivers, modulation techniques, serial communications, and applications. Personal area networks, local area networks, RFID systems. EET 330 Wireless Communications Systems (3) Wireless Communications Systems is a required course for junior-level students pursuing the Electrical
Analog/Digital and Digital/Analog Converters; advanced and nonlinear Op-Amp circuit design; noise analysis; Active Filters and Waveform Generators. EET 331 Electronic Design (4)E E T 330 is intended to provide competency in the application of basic electronic principles to design with operational amplifiers and integrated circuits. The course will include analog-to-digital and digital-to-analog conversion techniques; introduction to the feedback principles and non-ideal aspects of operational amplifiers including noise - needed for advanced design with op-amps; some nonlinear op-amp circuits - including comparators, Schmitt triggers, pulse width modulation, and ideal rectifiers, active filte design and waveform generator design. Grades will be based on 3 or 4 exams including a final exam (65%), laboratory work, computer projects requiring the use of circuit simulation software, spreadsheets, and math packages, and homework (30%), and student professionalism (5%). The IEEE code of ethics and the Penn State policy on academic integrity will be applied in the instructor's judgment of student professionalism. This course requires calculus through integral and differential calculus of transcendental functions, advanced circuit analysis techniques (E E T 311, E ENG 354, or E ENG 352), and knowledge of frequency response analysis techniques (E E T 312). It provides the electronic circuit analys and design skills required in the Electronics, Systems, and Technical Electives in the General Electrical Engineering Technology Option and the Applications and Technical Electives in the Computer Engineering Technology Option. Enforced Prerequisite at Enrollment: EET 311 or EE 314 or EE 315 and Concurrent EE 310 and EET 312
Measurement concepts, transducers, electronic-aided measurement, mechanical and electrical measurements. Intended for electrical engineering technologists. EET 341 Measurements and Instrumentation (3) Measurements and Instrumentation is a required course for junior- level students in the Electrical and Computer Engineering Technology (ECET) baccalaureate degree program. The purpose of the course is to understand the principles of measurement systems. The course enables students to design software for programming PC-based data acquisition (DAQ) systems, understand various sensors, design signal conditioning circuits for interfacing sensors to DAQ systems, and design various types of measurement systems. Laboratory exercises reinforce concepts developed in lecture. Undergraduate - The Pennsylvania State University 2026-2027 4043 Enforced Prerequisite at Enrollment: CMPET 117 and EET 212W Enforced Concurrent at Enrollment: MATH 141 or MATH 210
/Maximum of 18 . Supervised off-campus, nongroup instruction including field experiences, practica, or internships. Written and oral critique of activity required.
EET 402 provides students with fundamental concepts in high frequency (RF and microwave) circuit design used in the development of front-end electronics in telecommunication systems. Students will gain familiarity with high frequency circuit design topics including (but not limited to) limitations of lumped elements at high frequencies, parasitic effects, transmission line and distributed circuits, various types of transmission lines including (but not limited to) coaxial and planar transmission lines, Smith Chart, impedance matching, resonators and filters, scattering parameters, multiport networks, power divider and combiners, directional r couplers, and RF and microwave circuit modeling through computer aided design (CAD). The laboratory portion of the course provides students with the opportunity to learn about the operation of high frequency test equipment, such as network analyzers and spectrum analyzers, and to build and evaluate high-frequency and transmission- line-based circuits. Enforced Prerequisite at Enrollment: (EET 212W or EE 310) and EET 312
is This course is for students in Electrical Engineering Technology to gain understanding of the fundamental concepts and components of communication systems, supported by hands on experiments. Fundamentals of communication systems are covered and include signal analysis, noise, main building blocks and circuit components, effect of nonlinearities, signal generation, concepts of modulation and demodulation, analog modulation schemes such as AM, DSB, SSB, FM, and PM, transmitter and receivers architectures, and, if time permits, an introduction to digital communication schemes. After overviewing basic terminology and concepts such as signal spectrum, bandwidth, filtering, harmonics, power, and signal to noise ratio in communication systems, this course, in two parts, will expose students to two distinct aspects of communication technology. In the first part, the students will learn about the main components such as filters, resonators, amplifiers, mixers, oscillators, and phase locked loops. The second part will cover the main amplitude and angle modulation schemes and familiarize the students with modulator and demodulator circuits for those schemes. Topics covered in the course are supported by hands on labs performed each week during a lab session. Enforced Prerequisite at Enrollment: EET 312
This course will help students to understand power generation units, transmission lines, distribution systems and load flow. The main power system elements will be studied in detail. These elements include: generators (to generate electricity), transformers (to step up/down voltage levels for transmission purposes), transmission lines (in order to transmit the power from one location to another with minimum dissipation), and distribution systems (in order to distribute the transmitted power to customers). The course also helps students to learn the concept of fault analysis, the effect of line length on transmission lines, and the calculation of losses in synchronous generators. The basic theory of complex numbers will be used to simplify the analysis and calculations. Students will understand the typical operating principles for different types of power plants including: nuclear, coal, gas, wind, and solar. Enforced Prerequisite at Enrollment: EET 312
Power System Analysis II follows up the material from Power System Analysis I with more details on the analysis and calculation during faults or transients. Students will understand symmetrical faults such as three-phase and single-phase short circuits. Next, symmetrical components in power system will be introduced and impedance loads, series impedances, three-phase transmission lines, rotating machines, and transformers will be modeled. This course (Power System Analysis II) helps students to understand unsymmetrical faults such as single line to ground, double line to ground, and line to line faults. Furthermore, students will understand how to analyze the power system components under different fault conditions. Protection and relaying play an important role in a power system. Having equipment such as generators or transformers in power grids, engineers and power system planners should protect these expensive devices from faults or any transients. Relays and breakers are the best tools for protection. Relays sense the currents/voltages in multiple locations. If the measured current/ voltage is not within the limit, they send the command to the breakers to disconnect the circuit and protect the equipment. Students in Power System Analysis II will analyze the protection devices and operation principles of relays. The last topic in this course is the transient stabili of synchronous machines using equivalent dynamic model and generator control. This course will help students to model the generators in power systems and apply various control mechanisms such as: voltage, frequency, or power control to the synchronous generator model. Enforced Prerequisite at Enrollment: EET 409
Principles and applications of optoelectronics including sources, detectors, imagers, transmitters, fiber optics, systems and integrated optics. This course is designed as an elective course for the EET senior undergraduate students. This course introduces some critical components that are needed in fiber optic communication systems. This includes optical transmitters (Light emitting diode, and laser diodes), optical receivers (i.e., photodetector), modulators and demodulators, optical couplers (how to connect more than two fibers together), and optical amplifiers (including the basic principle of erbium doped fiber optic amplifiers). The topics covered in this course include Optics Review, Lightwave Fundamentals, Measuring Light, Optical Waveguides, Light Sources and Detectors, Couplers and Connectors, Noise and Detection, and System Design. Relevant laboratory experiences are used to reinforce the topics covered in class. Enforced Prerequisite at Enrollment: EET 312
Introduction to transducers and circuits used to detect and process medical physiological data with focus on cardiovascular and respiratory systems. Enforced Prerequisite at Enrollment: EET 312 and EET 331
EET 416Fluid and Thermal Design in Electrical Systems3
Introduction to basic electrical engineering technology concepts and applications of thermodynamics, heat transfer, and fluid power in electrical/ electronic systems. EET 416 Fluid and Thermal Design in Electrical Systems (3) Fluid and Thermal Design in Electrical Systems is a required course for senior-level students pursuing the electrical engineering technology (EET) option in the Electrical and Computer Engineering Technology (ECET) baccalaureate degree program. The purpose of the course is to teach principles of thermal sciences with an emphasis on electrical/electronic system applications. The course enables students to understand fundamental principles of thermodynamics, heat transfer, and fluid mechanics as they apply to thermal management of electronic systems. These principles include the first law of thermodynamics, the continuity equation, basic principles of system pressure loss and fans, the three modes of heat transfer, resistance analogy for heat flow, and the finite difference method for analyzing two-dimensional heat flow. Specialized CFD software is used to analyze temperatures in electronic systems. Laboratory exercises reinforce concepts developed in lecture. Enforced Prerequisite at Enrollment: EET 315 and (MATH 211 or MATH 231) and MATH 250 ty EET 419: Capstone Proposal Preparation This course guides students in the development of their capstone design project proposal and will mimic the problems encountered by an engineer working in commercial, industrial, and governmental entities. Students will select a topic, do the initial research for the topic, prepare a timeline, and prepare a well-written proposal that would make a suitable capstone project. The proposal will incorporate relevant engineering standards and integrate realistic economic, environmental, sustainability, manufacturability, ethical, health and safety, social, and political constraints. The time devoted to the careful selection of a topic, research of that topic, development of a timeline, and formal proposal preparation makes for a much better capstone design experience in EET 420W. Enforced Prerequisite at Enrollment: ENGL 202C and (CAS 100A or CAS 100S) Enforced Concurrent at Enrollment: EET 312 and EET 331 and (CMPEN 372 or CMPET 211)
Design, construction, and testing of a project either selected by the students with approval or assigned by the instructor. EET 420W Electrical Design Project (3) This course is designed with the following goals and objectives: 1. The students will enter the course with a well-defined project proposal and a timeline for which the first task will be to write the specifications. Upon the specifications' approval, the student teams will begin designing and building the project. 2. Each student will maintain a laboratory notebook that documents the day-to-day activities of the project in a style that could be used for patent documentation. 3. Team members will provide short oral and written reports every week for the first five to six weeks, and then every two weeks until the end of the semester. 4. The students will incorporate engineering standards and constraints, i.e., consideration of economic, environmental, sustainability, manufacturability, ethical, safety, etc., in their project and final report. A draft copy of the final report will be collected, critiqued, and returned t students with comments and suggestions for changes. 6. A final project oral report (20-25 minutes) will be given by the project team during the last week of the semester. 7. An extensive, well-written report describing the project that has been designed and built is the major outcome of the project course.Grades for the course will be based on: Weight Factor a. Written specifications for the project b. General conduct in the laboratory including lab notebook c. Oral and written progress reports including question-and-answer sessions d. Final oral and written reports including question-and-answer sessionsThis course is a required course in the Electrical Engineering Technology BS curriculum and is intended to be taken by seniors as the capstone course of the major. As such, the course integrates materials from many of the undergraduate electrical courses in addition to related math, engineering technology, and science courses. This course should be taken during the last semester (prior to graduation). Enforced Prerequisite at Enrollment: EET 312 and EET 331 and EET 419 and ENGL 202C Writing Across the Curriculum
Applications of analog and digital integrated circuits; introduction to analog and digital communication techniques. Enforced Prerequisite at Enrollment: EET 331
Classical and modern control analysis and design approaches, such as Laplace and state-space, aided by analog and digital computers. Enforced Prerequisite at Enrollment: EET 312
Fundamentals of power electronic circuits, semiconductor power devices, power conversion equipment. Circuit topologies, closed-loop control strategies, equipment design consideration. EET 461 Power Electronics (3) Power electronics is a technical elective for senior-level students in the Electrical and Computer Engineering Technology (ECET) baccalaureate degree program. The course introduces students to the different topologies used to convert electrical power via the use of solid state switching. Specifically, the course presents ac-dc, ac-ac, dc-dc and dc-ac converters. The different switching devices used (diodes, SCRs, MOSFETs, etc.) are discussed. Laboratory exercises complement the lecture material. Relevant topics such as power quality, EMI and applications of power electronics are presented. Enforced Prerequisite at Enrollment: EET 212W and (EET 214 or EET 213W) and (EET 315 or (EET 312 and EET 331))
Application of programmable logic controllers (PLCs) to data acquisition, automation and process control. EET 475 Intermediate Programmable Logic Controllers (3) Programmable logic controllers (PLCs) are the workhorse of the automation and process control industry. Their rugged design and ease of programming enables PLCs to operate in almost any manufacturing environment. PLCs are employed wherever measurement equipment and computers are needed to control large electrical equipment such as motors and actuators. In this course, students apply their knowledge of basic PLC programming to see how the PLC can be used to communicate with other equipment, sense and react to external stimuli, and provide both open loop and closed loop system control.
Individual or group design projects in electrical and computer engineering technology. EET 490W Electrical/Computer Senior Design Project (3) The Electrical/Computer Senior Design Project is a required course for senior-level students in the Electrical and Computer Engineering Technology (ECET) baccalaureate degree program. The purpose of the course is to have teams of senior students continue the senior design project they had started the prior semester in their Senior Seminar. The course focuses on project-based work where teams design, build, test and document the results of their senior design project effort. The course integrates and applies prior knowledge learned throughout the curriculum. Enforced Prerequisite at Enrollment: EET 480 Writing Across the Curriculum
/Maximum of 18 Supervised off-campus, nongroup instruction including field experience, practica or internships. Written and oral critique of activity required. Enforced Prerequisite at Enrollment: Prior approval of proposed assignment by instructor
