24 courses with the subject MNG, each shown exactly as we captured it from the college's catalog, with every element we hold. Where the wording looks broken, that is our reading of the catalog, not the college's text.
Examination, development, and exploitation of mineral deposits; mining methods; unit operations; mining equipment; fundamentals of explosives.
The infrastructure of mines includes power systems, communication and tracking systems, and monitoring systems. Larger surface and underground mines often have power systems of similar size and complexity to a large town, but with additional engineering challenges created by the need to move the power system as mining advances, the confined spaces of underground mines, and the possible presence of combustible ores or explosive gases. Specialized communication systems are required in many underground mines because radio waves propagate poorly in these spaces. Personnel tracking systems are sometimes used to provide location information for all miners. Mine- wide monitoring systems are becoming increasingly common to improve personnel safety and equipment maintainability. In total, these mine electrical systems are a vital component of modern mines. Mining engineers take the lead role in the design and specification of these systems, just as they would for the materials handling, ventilation, and other ancillary systems of the mine. The goal of this course is to develop the necessary knowledge and engineering skills so that this work can be performed in a competent and safe manner. Circuit laws and network theorems are reviewed and the analysis of circuits is presented. The use of phasors and impedance diagrams, and the concepts of complex power and the power triangle are introduced. Models for two and three-winding transformers are presented, and the fundamental electromechanical concepts for motors and generators are given. The analysis of balanced three-phase is studied. Next, the basic concepts of power system protection are addressed. Grounding, ground bed design, and related topics are presented. Shock, fire, and explosion hazards are an everyday 3. concern in mines, and the basic approaches for mitigating these hazards are covered. Distribution and utilization system arrangements, and the typical equipment for providing power within mines, are studied. Case studies from surface and underground mines are used to illustrate the concepts. The role of load flow and fault analyses in the design and operation of mine power systems is explained, and these concepts are applied using software tools. The application fundamentals of communications, tracking, and monitoring systems are presented, along with their operational advantages and limitations. The course culminates in a final project in which the mine electrical systems for a specific mine are designed. Enforced Prerequisite at Enrollment: PHYS 212
This course provides second- or third-year mining engineering students with an introduction to essential computer-aided design tools and software used in the mining and mineral processing industry. Students will gain hands-on experience with modern mining software. The course focuses on developing foundational skills for designing mine layouts, preliminary processing plant flowsheets, and supporting structures.
Ground stresses, laboratory rock properties, laboratory and field instrumentation, rock mass characteristics, subsidence, slope stability, design of mine workings. MNG 331 Rock Mechanics (3) This course was designed to introduce the student to the subject of rock mechanics. It includes an introduction to experimental stress analysis, the physical properties of rock, underground stresses, laboratory and field instrumentation, model studies, rock mass properties, and the discussion of a number of rock mechanics field applications associated with mining, petroleum and civil engineering, and geoscience. A technical paper written on some field related to the laboratory and/or theoretical aspect of rock mechanics is required. A series of eight laboratory sessions are included. These give the students hands-on experience relative to the concepts and instrumentation problems discussed in lectures. Enforced Prerequisite at Enrollment: EMCH 210
The mining industry consists of various stages of prospecting, exploration, beneficiation, development, and processing of naturally occurred solid minerals. These minerals include both metals (copper, iron, zinc, etc.) and nonmetals (coal, potash, limestone etc.), and all of these minerals are closely related to our daily life. For example, the coal still accounts for more than 50% of the electrical energy production. Both surface and underground mining has a long history globally. Modern techniques and large equipment have been applied in mining industry to increase the production effectiveness and create a healthy and safety environment in mining industry. This course offers an introduction to mining operations and related issues. The course will start with the role of minerals and mining in our daily lives and modern society. How should we classify and recognize different types of minerals beneath the earth? The course examines various stages of mining including prospecting, exploration, development, exploitation, and reclamation. From a mining engineer perspective, how to design a mining system form the beginning to the end. Common unit operations in mining, mining equipment, and some of the auxiliary processes are covered. Surface mining methods and surface mine development will be presented, as well the underground mining methods and the development of underground mines. The objective of this course is to introduce students to mining operations through study of basic concepts and equipment that facilitate the extraction of mineral resources. This includes learning about the stages of a mining project and life cycle of a mine, understanding the concepts of ore grades and reserves, mine development, mining methods, and unit operations that are essential to the operation of a mine. Through this course, students should build up the basic structure of mining industry, master the primary stages of developing a surface and underground mine, and enable to select a proper mining method based on the information of geology, deposit condition, mineral properties and so on. Equipment selection and capacity calculation at different mining stages is expected through learning in this course as well. Enforced Prerequisite at Enrollment: MATH 141
/Maximum of 2 The objective of this course is to provide students with the basic principles and methodology involved in design of material handling systems used in the mining industry. The course will cover various types of material handling methods and equipment including continuous and cyclic loading and transportation systems. The course will review surface mining equipment including loaders, shovels, draglines, trucks, rail, dozers and scrapers. It will also discuss underground mining and various equipment such as loaders, rail, shuttle cars and coal haulers, panel conveyance and vertical transportation including hoisting and vertical conveyor. The design approaches will be discussed including the calculation of cycles, capacity of the system and equipment selection. Enforced Concurrent at Enrollment: MNG 230
Underground mine design; extraction techniques; description of auxiliary operations as they relate to the mining methods. MNG 410 Underground Mining (3) The purpose of this course is to describe the logic and discuss the steps taken in the planning and design of an underground mine. Since every underground mine incorporates a unique combination of technological, economic, legal, social, and environmental factors, the course will stress the auxiliary operations (ventilation, ground control, etc.) which must be accommodated, as well as the unit operations and equipment dealing with resource extraction. Enforced Prerequisite at Enrollment: MNG 404 and MNG 422 and MNG 331
This course is aimed at applying operations research and systems methods for decision making in mine operations to improve productivity. The course is designed to introduce the student to the subject of applied operations research and systems methods for efficiently solving various problems in mine design and operations analysis. The major topics include linear programming, the simplex method, transportation problem, network models, critical path method, engineering statistics, regression analysis, simulation techniques. The course uses various mining production and optimization case studies to demonstrate the importance of operation research in the mining production management. The course also use introduce the concept of time study for the multi- process mining operation and use the statistical method for the data analysis. Enforced Prerequisite at Enrollment: MNG 230 and MNG 404
Ore reserve estimation using statistics and geostatistics, mine cost estimation, engineering economy concepts applied to mineral deposits. Students are prepared for a comprehensive understanding of how a resource or reserve is assessed in the mining industry. The students learn the following topics: background of mineral exploration (requirements for exploration and data collection, as well as exploration tools and techniques), manual techniques for ore reserve evaluation, computer
The objective of this course is to develop for students a thorough understanding and working knowledge of the health, safety, legal, economic, and reliability aspects of mine ventilation and air conditioning systems and their design and analysis. Strong emphasis is placed on engineering design of mine ventilation systems for underground mines. Mining Engineers working in underground mines must have the skills to design, implement, monitor and maintain the ventilation systems in place to ensure a comfortable working environment. The course provides you with the knowledge necessary to do so. This course also includes an overview of basics of thermodynamics. After completing this course, you will be able to decide on fan size, airway geometry, monitor ventilation performance, determine heat loads and design future ventilation plans. The following topics are covered in this course: (1) The Mechanics of Mine Ventilation: Introduction and history of the subject; airflow systems, forcing, exhausting and push-pull configuration; determination of air quantity requirements and measurement of airflow in mine openings; laws of airflow; airway and circuit resistance; ventilation economics; (2) Airflow Planning: Air quantity surveys; pressure surveys, gauge and tube, barometer techniques; ventilation network analysis, numerical methods; simulation programs; (3) Thermodynamics of Mine Ventilation: Basics of thermodynamics, steady-flow relationships; laws of thermodynamics; frictional flow, isothermal, isentropic and polytropic processes; thermodynamics cycles in mine circuits, downcast and upcast shafts, workings, natural ventilation and natural/fan ventilation combined. Enforced Prerequisite at Enrollment: (CE 360 or EME 303) and MNG 230 Enforced Concurrent at Enrollment: ME 201
Design of surface mining for non-coal and coal minerals, emphasis on open pit, quarry and strip mining planning parameters: unit operations, systems, haul roads, draglines, spoil stability, reclamation, legal requirements, and health and safety. The objective of this course is to provide students with the basic principles and methodology involved in surface mining and design. The topics covered in this course include: 1- surface mining methods, 2- mine design and planning including slope stability, road design and construction, stripping ratio calculations, pit limits, production planning, 3- surface mining operations including overburden removal, drilling and blasting, loading and hauling operation, 4- mine reclamation, environmental consideration, legal requirements, health and safety. The students learn how to utilize software packages for mine design and planning. Enforced Prerequisite at Enrollment: MNG 230 and MNG 404 Undergraduate - The Pennsylvania State University 2026-2027 4583
Graduate - The Pennsylvania State University 2026-2027 329 Integrated B.S. in Petroleum and Natural Gas Engineering and M.S. in Energy and Mineral Engineering This Integrated Undergraduate/Graduate (IUG) degree program combines the B.S. in Petroleum and Natural Gas Engineering with the M.S. in Energy and Mineral Engineering offered at the following campuses:
/Maximum of 6 Independent research under the supervision of the Mining Engineering program. Enforced Prerequisite at Enrollment: Prior approval of program
/Maximum of 18 Creative projects, including research and design, which are supervised on an individual basis and which fall outside the scope of formal courses.
/Maximum of 9 Formal courses given on a topical or special interest subject which may be offered infrequently; several different topics may be taught in one year or term.
This course will prepare the students with tools to evaluate mineral resources and mining projects from industrial perspectives. Students are expected to possess basic understanding of geostatistics, economic and accounting principles, and the mining industry in general. This course will provide additional insight in geostatistical methods and the economic and financial decision-making process. Case studies will examine recent major global exploration undertakings to reinforce key concepts. RECOMMENDED PREPARATIONS: Students are expected to possess basic understanding of geostatistics, economic and accounting principles, and the mining industry in general, as covered in MNG 412, EME 460, or equivalent.
Design analysis and selection criteria for principal surface mine equipment, their interaction in operation, and auxiliary equipment requirements.
Engineering design process; design of mines, tunnels, slopes, and underground chambers; guided design concept; creativity and innovation; group design project.
/Maximum of 9 Creative projects, including nonthesis research, which are supervised on an individual basis and which fall outside the scope of formal courses.
/Maximum of 9 Formal courses given on a topical or special interest subject which may be offered infrequently; several different topics may be taught in one year or term.
/Maximum of 9 Formal courses given on a topical or special interest subject which may be offered infrequently; several different topics may be taught in one year or semester.
/Maximum of 999 No description.
0 Credits/Maximum of 999 No description. Molecular, Cellular, and Integrative
Source: Pennsylvania State University-Penn State Erie-Behrend College's catalog, linked per course · table learning_unit · CourseShelf publish 59
