Safety and Health Management 3sh
- Subject
- SA
- Type
- course
- Edition
- undergraduate
- Source
- www.iup.edu
30 courses with the subject SA, each shown exactly as we captured it from the college's catalog, with every element we hold. Where the wording looks broken, that is our reading of the catalog, not the college's text.
Safety and Health Management 3sh
3c-0l-3sh Designed to provide the student with an in-depth background of the problems involving mine safety. A historical approach to coal and mineral mining is reviewed; legislative influences such as the Federal Coal Mine Health and Safety Act, the Metal and Nonmetal Mine Health and Safety Act, and the Occupational Safety and Health Act are discussed in depth; mining techniques, methods, and systems are discussed. Management of mine health and safety programs is presented. Federally mandated training of employees is covered. [Offered occasionally]
3c-0l-3sh Stresses an understanding of the complexity of the industrial hazard control problem by thoroughly examining elements of safety and health enumerated in the OSHA promulgated standards and various consensus standards. Emphasis directed at plant layout and design, powered industrial vehicles, boilers and unfired pressure vessels, machine guarding, robotics safety, and an introduction to industrial processes.
3c-0l-3sh This course offers the student a practical approach to the understanding of, and compliance with, the various environmental regulations that impact on business. A thorough discussion of the definitions, categories, and evaluation of hazardous materials is included. Environmental laws covered include the Clean Water Act, the Clean Air Act, the Resource Conservation and Recovery Act, the Comprehensive Environmental Response, the Compensation and Liability Act, the Occupational Safety and Health Act, and other related laws.
3c-0l-3sh Stresses an understanding of the complexity of the industrial hazard control problem by thoroughly examining elements of safety and health enumerated in the OSHA promulgated standards and various consensus standards. Emphasis is placed on personal protective equipment, welding and cutting, walking and working surfaces, materials handling and storage, electrical safe work practices, and construction safety. Application of hazard control strategies is accomplished in laboratory sessions.
3c-0l-3sh Focuses on the various aspects of mining operations such as slope and shaft development; mine design; ground control; hoisting; man-trips; haulage; mining equipment; mine emergency planning and procedures; mine communications and maintenance. [Offered occasionally]
3c-0l-3sh Covers surface mining operations such as slope stability, equipment, ground water, and control. Mine-related processing operations are discussed. Provides an in-depth study of the various controls of electrical hazards and ignition sources such as permissible equipment and electrical distribution systems. The uses of explosives and blasting practices, handling, storing, and transportation with emphasis on causes of explosion involving dust and gases are discussed. [Offered occasionally]
3c-0l-3sh Traces flow of applicable legislation dealing with consumerism and product safety. Corporate liability for product safety emphasized through case studies. Student familiarized with evolving role of Consumer Product Safety Commission. Corporate management of product development and safety detailed with emphasis on systems safety analysis, standards, and product testing.
var-1-3sh Special topics are offered on an experimental or temporary basis to explore topics that are not included in the established curriculum. A given topic may be offered under any special topic identity no more than three times. Special topics numbered 281 are offered primarily for lower-level undergraduate students.
0c-0l-0sh The initial experience in a program designed to combine classroom theory with practical application through job- related experiences. The course is open to SA majors and minors usually in their sophomore year. Students are employed by organizations outside western Pennsylvania where there is an ongoing hazard control program under the direction of an experienced professional. The student is required to be in good academic standing and to serve a minimum of two alternating work experiences.
Controlled electives: Three SA courses approved by department chairperson 9sh Table of Contents | Index of Courses This information is maintained by the Office of the Registrar, with approval from the Un at 7:36 PM on 7/23/98. iversity Senate. Last Modified
3c-0l-3sh Study of engineering, administrative, and personal protective equipment as methods of reducing or eliminating hazards to the health of industrial workers. Topics covered include industrial ventilation, noise control, heat control, radiation control, personal protective equipment, and industrial health program.
3c-0l-3sh Introduces fundamental concepts in protection of industrial workers and property from fire and explosion. Fire chemistry, control of ignition sources in industry, and properties of combustible materials are discussed. Fire detection and extinguishment are covered along with building construction for fire prevention, life safety, fire codes, and related topics.
2c-3l-3sh Focuses on the evaluation of system designs using detailed system analysis techniques. Topics covered include system definition, economics of systems safety, systems safety methodology, mathematics of systems analysis including statistical methods, Boolean Algebra, and reliability. Skills gained include the ability to perform preliminary hazard analysis, failure mode and effect analysis, fault tree analysis, and exercises in the application of fault tree analysis to hardware and man/machine systems. Practical analysis work is accomplished in laboratory sessions.
2c-3l-3sh An exploration of the principles which control human performance and its effect upon the safety and reliability of systems. Engineering anthropometry, human perception, biomechanics of motion and work posture, work physiology and human performance measurement are covered in the context of their application in workplace design. Students will be instructed in methodologies for analysis of tasks and human performance requirements. Important human limitations and ergonomic hazard evaluations, such as lifting and repetitive motion tasks, are studied in laboratory sessions.
3c-0l-3sh Includes topics involved with the development and operation of motor fleet safety programs: driver selection and training, accident investigation and recordkeeping, equipment safety features, preventive maintenance, and driver incentive programs.
3c-0l-3sh
0c-0l-0sh A second experience in a program designed to combine classroom theory with practical application through job-related experiences. The course is open to SA majors and minors usually in their junior or senior year. Students are employed by organizations outside western Pennsylvania where there is an ongoing hazard control program under the direction of an experienced safety professional. The student is required to be in good academic standing and to serve a minimum of two alternating work experiences.
2c-3l-3sh Study of mine ventilation principles and practices which provide a basic knowledge in design and operation of mine ventilation systems. The topics of airflow physics, ventilation standards, fan fundamentals, pressure losses, required air flows, and overall design are discussed. Specific problems in mine ventilation will be solved. [Offered occasionally]
2c-3l-3sh A lecture/laboratory course which provides a basic understanding of techniques used in measuring and evaluating the magnitude of health hazards in industry. Laboratory sessions provide experience in air sampling, noise measurement, heat measurement, particle size analysis, chemical analysis, and evaluation of industrial ventilation systems.
3c-0l-3sh Teaches various safety management techniques to identify and prevent the occurrence of hazardous behavior and conditions. Devises methods capable of extracting accurate, meaningful data, methods of collecting, codifying, and processing hazard and loss incident information, and utilizing data retrieval systems to be used in cost/benefit decision-making for hazard prevention, safety program and performance evaluation, and risk management.
3c-0l-3sh Focuses on various aspects of accident investigation such as recent theories associated with accident causes, investigative techniques, data acquisition, structure of investigative reports, management responsibilities, and remedial actions. Particular emphasis on determining sequence of events to develop management actions which will prevent recurrence of accidents.
3c-0l-3sh Focuses on various major aspects of the air pollution problem. Includes sources of pollution, evaluation and engineering of pollutants, government regulations, atmospheric chemistry and dispersion, and human and nonhuman effects. Particular emphasis on information that is practical for the safety management, industrial health, or environmental health professional.
3c-0l-3sh Study of problems associated with ionizing radiation in human environment. Emphasis given to biological effects, radiation measurement, dose computational techniques, exposure control, and local and federal regulations. Study and use of various radiological instruments included.
3c-0l-3sh Covers both the federal and selected state right-to-know laws and related legislation. The scope, application, and enforcement of the various laws including specific legal and moral obligations are discussed. Strategies are explored and developed to identify the means by which employers can gain compliance with regulatory requirements.
3c-0l-3sh Designed to cover all important aspects of loss prevention as it is practiced in the chemical process industries. Its objective is to prepare the safety professional so that he/she may be able to work more effectively with chemists and chemical engineers in joint hazard identification, evaluation, and control projects.
var-1-3sh Special topics courses are offered on an experimental or temporary basis to explore topics that are not included in the established curriculum. A given topic may be offered under any special topic identity no more than three times. Special topics numbered 481 are primarily for upper-level undergraduate students.
var-1-3sh Students with interest in independent study of a topic not offered in the curriculum may propose a plan of study in conjunction with a faculty member. Approval is based on academic appropriateness and availability of resources.
Other Requirements: 27 Additional Science and Math:
var-6sh All Safety Sciences majors are expected to take this course. It is conducted away from the university at various industrial enterprises. Students are required to provide their own transportation. Intended to allow the student to apply hazard assessment and safety management practices to actual industrial situations while at same time being exposed to
Source: Indiana University of Pennsylvania-Main Campus's catalog, linked per course · table learning_unit · CourseShelf publish 59